Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpKitchenAid Washer RepairKitchenAid Washer won't start Repair
KitchenAid Washer won't start
When your KitchenAid washer won't start, first make sure both the hot and cold water supply valves are fully open. A washer not starting may be unable to fill and begin the cycle when either valve is closed. Next, check the user control and display board by pressing the control panel buttons. If some buttons work while others do not, or the display is blank even though the board has power, the user interface board may be defective. The timer is another possible cause, but it is often misdiagnosed. Test it for continuity with a multimeter and consult the wiring diagram before replacing it. Also verify that the washer door or lid is completely closed, since the machine will not run when the lid or door is open. Finally, test the line fuse for continuity. If it has blown, inspect the wiring, motor, or drain pump for a short before installing a replacement. Enter your KitchenAid washer model number to find the exact replacement part for your specific washing machine.
01 - Water Supply Valves are Closed
Confirm that both the hot and cold water supply valves are open. If the valves are closed the washer won't fill to start the wash cycle.
Top Solution
02 - KitchenAid Washing Machine User Control and Display Board
To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Enter model number to search for the required part specific to your product
Top Solution
03 - KitchenAid Washing Machine Timer
The timer is frequently misdiagnosed—before replacing the timer, first check all of the more commonly defective parts. To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity.
Top Solution
04 - Door or lid is open
Make sure the door or lid is closed. Most machines will not run with the door or lid open.
Top Solution
05 - Door is Open
Make sure the door is closed. The washer will not run with the door open.
Top Solution
06 - KitchenAid Washing Machine Line Fuse
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely
07 - KitchenAid Washing Machine Thermal Fuse
If the washer overheats, the thermal fuse will blow. If the line fuse blows, the washer won’t start. To determine if the thermal fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely
Frequently Asked Questions
Why won't my KitchenAid washer start?
Why does my washer have power but won't start?
How do I test a KitchenAid washer timer or line fuse?
Could an open door or lid keep my KitchenAid washer from starting?
How do I find the correct KitchenAid washer replacement part?