Choose Product
Identify Problem
03
Find Solutions
Washer is making loud noise
Brand:Roper
Model:RAS8445JQ0
Product:Washing Machine
Featured Video
Top 5 Reasons Front-Load Washer Is Making Loud Noise?
02:19
Common solutions for: Washer is making loud noise
01 - Shipping bolts have not been removed
Shipping bolts and a foam block are often used when transporting new washing machines to prevent the tub from moving and becoming damaged. Confirm the bolts (located at the rear of the washer) and the foam block have been removed before operating the appliance.
Top Solution
02 - Tub Seal and Bearing Kit
The tub bearing is mounted in the middle of the outer tub. The tub bearing helps to keep the inner tub spinning smoothly. If the washer is noisy during the spin cycle or is leaking from the bottom of the tub near the transmission, the tub seal and bearing are likely defective. Replacing the tub bearing is a very involved repair and will require disassembling most of the washer. If the tub bearing is defective, we recommend replacing the outer tub and bearing at the same time.
Genuine Part
Top Solution
03 - Bearing
The tub bearing is mounted in the middle of the outer tub. The tub bearing helps to keep the inner tub spinning smoothly. Replacing the tub bearing is a very involved repair and will require disassembling most of the washer. If the tub bearing is defective, we recommend replacing both the outer tub and bearing.
Genuine Part
Genuine Part
Genuine Part
Genuine Part
Top Solution
04 - Improperly balanced load
If there are light and heavy items in the same load, or too few items, the tub can spin out of balance. Wash items with aproximately the same weight together, and consider adding items if necessary, to better balance the load.
Highly Likely
05 - Washer not level
The washer should be level with the feet sitting firmly on a solid floor. Level the appliance and adjust the legs if necessary.
Highly Likely
06 - Foreign objects in the tub or pump
Foreign objects such as coins or safety pins may be in the tub or pump. Inspect the tub for foreign objects that may be rattling around. Most front-load washers have a removable drain trap behind a small door near the bottom of the washer to keep items from getting to the pump. Unplug the power cord for safety, then inspect the drain trap and remove any items as needed.
Common
07 - Motor Coupling
The motor coupling might have failed. The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.
Genuine Part
Fits your Roper Washing Machine
$25.95Save $297.25 by Fixing it Yourself
4:01
Step-by-Step Motor Coupling Replacement
Technician Verified
Difficulty:
Easy
Avg. Repair Time:Under 1 hour
Less Common
08 - Clutch
The clutch assembly makes the connection between the transmission and the inner tub. It helps the tub to gradually get up to the proper spin speed. As the clutch wears out over time, it may become loud during the spin cycle or just after the spin cycle finishes. The clutch is not repairable—if the clutch is worn out, replace it.
Genuine Part
Fits your Roper Washing Machine
$45.18Save $359.26 by Fixing it Yourself
4:10
Step-by-Step Clutch Replacement
Technician Verified
Difficulty:
Moderate
Avg. Repair Time:Under 1 ½ hours
Less Common
09 - Basket Drive
The hub or basket drive sits on top of the transmission and engages with the inner tub. If the inner tub is making a loud noise, the hub teeth may be stripped. Alternatively, the drive block which engages with the hub teeth may be stripped. Inspect both the hub and the drive block. If the hub teeth and drive block are not worn out, the clutch pads on the basket drive are likely worn out. If the clutch pads are worn out, you must replace the basket drive.
Genuine Part
Fits your Roper Washing Machine
$128.34Save $329.01 by Fixing it Yourself
10:49
Step-by-Step Basket Drive Replacement
Technician Verified
Difficulty:
Moderate
Avg. Repair Time:Under 1 hour
Less Common
10 - Transmission
The washer transmission might be worn out or defective. Transmissions have gears in them that can fail causing the washer to to be noisy during operation. However, this is almost never the case. Before replacing the transmission, first check all of the other more commonly defective parts.
Genuine Part
Fits your Roper Washing Machine
$337.69Save $408.56 by Fixing it Yourself
4:42
Step-by-Step Transmission Replacement
Technician Verified
Difficulty:
Moderate
Avg. Repair Time:Under 1 ½ hours
Less Common
11 - Drain Pump
If the washer is making a loud noise while draining, the drain pump might be clogged or defective. Sometimes, small objects or articles of clothing can get caught in the drain pump. To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions. If the drain pump is clear of obstructions, but is still noisy during the drain cycle, replace the drain pump.
Genuine Part
Fits your Roper Washing Machine
$49.82
3:15
Step-by-Step Drain Pump Replacement
Technician Verified
Difficulty:
Easy
Uncommon But Possible
12 - Drive Motor
The drive motor bearings might be worn out. Washer motors are normally very quiet during operation. To determine if the washer motor is defective, remove the drive belt from the washer and then run the motor. If the motor is still loud, this indicates that the drive motor is defective and needs to be replaced.
Genuine Part
Fits your Roper Washing Machine
$163.55
3:54
Step-by-Step Drive Motor Replacement
Technician Verified
Difficulty:
Easy
Uncommon But Possible
13 - Water Inlet Valve
If the washer is noisy or loud, particularly when the washer is filling, the water inlet valve may be at fault. Over time, mineral deposits can build up inside the valve and cause a restriction. If the water inlet valve is restricted, it will make noise during the fill cycle. If the water inlet valve is defective, replace it. Do not attempt to repair the water inlet valve—taking apart the valve makes it susceptible to failure.
Genuine Part
Fits your Roper Washing Machine
$37.85Save $299.41 by Fixing it Yourself
3:30
Step-by-Step Water Inlet Valve Replacement
Technician Verified
Difficulty:
Easy
Avg. Repair Time:Under 1 hour
Uncommon But Possible