Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpHaier Washer RepairHaier Washer takes too long Repair
Haier Washer takes too long
When your Haier washer is taking too long to wash, check the water supply first. Confirm both the hot and cold water supply valves are fully open. A closed or partially open valve can make the washer fill slowly or delay the start of the cycle. If you are wondering, "Why does my washer take so long?" a defective heating element may also be responsible, especially on models that heat the water in the tub. Test the heating element with a multimeter for electrical continuity and replace it if it fails. A faulty water inlet valve is another possible cause of a washer cycle that takes too long. Check that household water pressure is adequate, then clean the screens in the valve's hose connection ports. If the washer still fills slowly, replace the water inlet valve. These checks apply whether your washing machine is taking too long or the washer has a long wash cycle. Enter your Haier washer's model number to find the exact replacement heating element or water inlet valve for your specific machine.
01 - Water supply valve turned off
Confirm that both the hot and cold water supply valves are fully open. If the valves are closed or partially open the washer won't fill or will take longer to start the wash cycle.
Highly Likely
02 - Haier Washing Machine Heating Element
Many washers use a heating element to raise the temperature of the water entering the tub. A defective element may cause the washer to take too long to clean its load. You can use a multimeter to test the heating element for electrical continuity. If the element tests negative for continuity, you'll know the heating element is faulty and will need to be replaced.
Enter model number to search for the required part specific to your product
Less Common
03 - Haier Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
Less Common
Frequently Asked Questions
Why is my Haier washer taking so long to wash?
Can low water pressure make my Haier washing machine take too long?
How do I test the heating element in my Haier washer?
How do I know if the water inlet valve is causing my Haier washer to fill slowly?
How do I find the correct replacement part for my Haier washing machine?