Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpAmana Washer RepairAmana Washer takes too long Repair
Amana Washer takes too long
If your Amana washer is taking too long to wash, a closed or partially closed water supply valve is the most likely cause. Confirm that both the hot and cold valves are fully open, since restricted water flow can delay filling and keep the cycle from starting on time. If the valves are open, the heating element may be defective. Many Amana washing machines use a heating element to raise the incoming water temperature, and an element without electrical continuity can make the washer cycle too long. Test it with a multimeter and replace it if it fails. A faulty water inlet valve is another possible cause of a washing machine taking too long. Check household water pressure first, then clean the valve's inlet screens. If the washer still fills slowly, replace the water inlet valve. These checks can help answer, "Why does my washer take so long?" Enter your model number to find the exact replacement heating element or water inlet valve for your specific Amana washing machine.
01 - Water supply valve turned off
Confirm that both the hot and cold water supply valves are fully open. If the valves are closed or partially open the washer won't fill or will take longer to start the wash cycle.
Highly Likely
02 - Amana Washing Machine Heating Element
Many washers use a heating element to raise the temperature of the water entering the tub. A defective element may cause the washer to take too long to clean its load. You can use a multimeter to test the heating element for electrical continuity. If the element tests negative for continuity, you'll know the heating element is faulty and will need to be replaced.
Enter model number to search for the required part specific to your product
Less Common
03 - Amana Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
Less Common
Frequently Asked Questions
Why does my Amana washer take so long to wash?
Why is my Amana washer filling slowly?
How do I test the heating element in an Amana washing machine?
Can low water pressure make my Amana washer take too long?
How do I find the correct replacement part for my Amana washer?