If your Speed Queen washer controls are not working, start with the power supply before replacing control parts. When the entire display or timer is dead, inspect the washing machine power cord for breaks, exposed wires, or blackened terminals. A failed line fuse or washer fuse can produce the same symptom, so test each fuse for electrical continuity with a multimeter and replace any fuse that has no continuity. If the washer has power but the controls still do not respond, inspect the selector knob, timer knob, and control knob. A cracked or stripped knob may slip on the switch or timer stem instead of turning it, causing washer controls not working, a washer control panel not working, or a washer knob not working problem. These checks also apply when a washer selector knob is not working or the washing machine display is not working. Disconnect power before inspecting or testing electrical components, and replace damaged parts with the correct Speed Queen component. Enter your model number to find the exact replacement part for your specific washing machine and confirm compatibility before ordering.
01 - Speed Queen Washing Machine Power Cord
If the whole washer display or timer is not working, the washer's power cord could the source of the problem. Inspect the cord for any breaks or burn marks near the terminals. If the terminals appear blackened or wires are exposed through the cord's insulation, you should replace the power cord with a new one.
Enter model number to search for the required part specific to your product
If the whole washer display or timer is not working, it's possible the line fuse has blown. You can use a multimeter to test the fuse for electrical continuity. If the fuse has no continuity, you'll know it has blown and will need to be replaced.
If the whole washer display or timer is not working, it's possible the washer's fuse has blown. You can use a multimeter to test the fuse for electrical continuity. If the fuse has no continuity, you'll know it has blown and will need to be replaced.
A washer selector knob needs to be able to engage and rotate the selector switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
A washer control knob needs to be able to engage and rotate the switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
The washer's timer knob needs to be able to engage and rotate the timer stem for the control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
A washer control knob needs to be able to engage and rotate the switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.