Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpAsko Washer RepairAsko Washer controls don't work Repair
Asko Washer controls don't work
When your Asko washer controls are not working, start by checking whether the entire display or timer is dead. A damaged power cord is the most likely cause, especially if you see breaks, exposed wires, burn marks, or blackened terminals near the connections. If the cord looks good, test the line fuse and washer fuse with a multimeter for continuity. A fuse with no continuity has blown and must be replaced. If the display works but the washer control panel, buttons, or knobs do not respond, inspect the selector knob, timer knob, and control knob. A cracked or stripped knob may slip on the stem instead of turning the selector switch or timer, causing a washer knob not working problem or a washer selector knob not working problem. These checks also apply when the washing machine display is not working or the washer buttons are not working. Disconnect power before inspecting or testing electrical parts, and replace damaged components with the correct Asko replacement. Enter your model number to find the exact power cord, fuse, selector knob, timer knob, or control knob for your specific washing machine.
01 - Asko Washing Machine Power Cord
If the whole washer display or timer is not working, the washer's power cord could the source of the problem. Inspect the cord for any breaks or burn marks near the terminals. If the terminals appear blackened or wires are exposed through the cord's insulation, you should replace the power cord with a new one.
Enter model number to search for the required part specific to your product
Top Solution
02 - Asko Washing Machine Line Fuse
If the whole washer display or timer is not working, it's possible the line fuse has blown. You can use a multimeter to test the fuse for electrical continuity. If the fuse has no continuity, you'll know it has blown and will need to be replaced.
Top Solution
03 - Asko Washing Machine Fuse
If the whole washer display or timer is not working, it's possible the washer's fuse has blown. You can use a multimeter to test the fuse for electrical continuity. If the fuse has no continuity, you'll know it has blown and will need to be replaced.
Top Solution
04 - Asko Washing Machine Selector Knob
A washer selector knob needs to be able to engage and rotate the selector switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
Highly Likely
05 - Asko Washing Machine Knob
A washer control knob needs to be able to engage and rotate the switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
Highly Likely
06 - Asko Washing Machine Timer Knob
The washer's timer knob needs to be able to engage and rotate the timer stem for the control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
Highly Likely
07 - Asko Washing Machine Control Knob
A washer control knob needs to be able to engage and rotate the switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch.
Highly Likely
Frequently Asked Questions
Why are the controls on my Asko washer not working?
How do I test an Asko washer line fuse or fuse?
Why does my Asko washer selector knob or timer knob spin without changing the setting?
What should I check when my Asko washer display or timer does not turn on?
How do I find the correct replacement part for my Asko washer controls?