Roper Washer is unbalanced
Is your Roper washer unbalanced, shaking, or going off balance during the spin cycle? The most likely cause is that the washer is not level. Check that all four leveling feet touch the floor firmly and that the cabinet does not wobble. Adjust the leveling feet until the washer sits solidly, then use a bubble level to confirm the machine is level from front to back and side to side. A washer that is not level can cause a washing machine unbalanced condition, excessive movement, or a load balancing problem during spin. If the washer remains unstable after adjustment, the machine may be unable to level properly and could require service. Depending on the model, worn suspension components such as suspension rods, shock absorbers, tub springs, a snubber ring, or a leveling foot may also need inspection. For accurate Roper washer repair, enter your washing machine’s model number to find the exact replacement part for your specific appliance. RepairClinic carries Roper leveling feet and other washer parts to help restore stable, reliable operation.