Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpU-Line Refrigerator RepairU-Line Refrigerator freezing food Repair

U-Line Refrigerator freezing food

If your refrigerator is freezing food or the fridge is too cold, start with the most likely causes and work down the list: a faulty temperature control thermostat that sticks closed and runs the system too long, a bad thermistor that reports the wrong temperature to the control, or a temperature control board that sends continuous voltage to the compressor or fans. The main control board can cause the same symptom but is rarely the culprit, so test the thermostat and thermistor first. Sometimes the problem is simply the temperature set too cold, so verify the setting and wait 24 hours for it to stabilize (most models aim for 34 to 38°F). A failing evaporator fan motor can also overchill parts of the refrigerator by pushing too much cold air into the fresh food section. Use a multimeter and the simple click test on the thermostat to narrow it down, and if you need parts, enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator.

01 - U-Line Refrigerator Temperature Control Thermostat

The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it may cause the refrigerant system to run longer than necessary. As a result, the refrigerator will be too cold. To determine if the thermostat is defective, rotate the thermostat from the lowest setting to the highest setting and listen for a click. If the thermostat clicks, it is not likely defective. If the thermostat does not click, use a multimeter to test the thermostat for continuity. If the temperature control thermostat ...does not have continuity at any setting, replace it.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all U-Line Refrigerator Temperature Control Thermostat Parts
Top Solution

02 - U-Line Refrigerator Thermistor

The thermistor monitors the air temperature and sends the temperature reading to the control board. The control board then regulates power to the compressor and evaporator fan based on the thermistor readings. If the thermistor is defective, the compressor and evaporator fan may run too frequently. As a result, the refrigerator will be too cool. To determine if the thermistor is defective, test it with a multimeter. The thermistor resistance should change in conjunction with the refrigerator temperature. If the thermistor resistance does not change, or the thermistor does not have continuity, replace the thermistor.
Shop all U-Line Refrigerator Thermistor Parts
Highly Likely

03 - U-Line Refrigerator Temperature Control Board

The temperature control board provides voltage to the compressor and fan motors. If the control board is faulty, it may send continuous voltage to the compressor or fan motors. As a result, the refrigerator will be too cool. Control boards are often misdiagnosed—before replacing the control board, first test all of the more commonly defective components. If none of the other components are defective, consider replacing the temperature control board.
Shop all U-Line Refrigerator Temperature Control Board Parts
Highly Likely

04 - U-Line Refrigerator Main Control Board

The main control board might be defective. However, the control board is very rarely the cause of the problem. Before replacing the control board, first test all of the more commonly defective components. If none of these components are defective, consider replacing the main control board.
Shop all U-Line Refrigerator Main Control Board Parts
Highly Likely

05 - Temperature set too cold

Adjust the refrigerator temperature control to a warmer setting. Many models have a recommended temperature setting displayed, usually between 34 and 38 degrees Fahrenheit (1 and 4 degrees Celsius). Wait 24 hours for the temperature to adjust appropriately.
Highly Likely

06 - U-Line Refrigerator Evaporator Fan Motor

The refrigerator's evaporator fan motor draws air over the cold evaporator coils which chills the air. The air is then circulated through the refrigerator and freezer compartments to keep the temperature low enough to preserve food. If the evaporator fan motor is malfunctioning, the cold air from the freezer or refrigerator evaporator coils can migrate through the air ducts to the bottom of the refrigerator and freeze the food. You should try rotating the evaporator fan blades to see if they spin freely. If not, it's likely the motor bearings have seized and the motor will need to be replaced. You can also use a multimeter... to test the motor for electrical continuity. If the motor has no electrical continuity, the component won't run and a new motor will need to be installed.
Shop all U-Line Refrigerator Evaporator Fan Motor Parts
Common

07 - Food Items too close to the vents

Since food placed directly in front of the cold air vents can freeze, allow space between the air vents and the food.
Common

Frequently Asked Questions

Why is my refrigerator freezing food?
Refrigerator runs constantly and gets too cold — what should I check?
Refrigerator control panel not working: is the temperature control board the same as the main control board?
Refrigerator freezing food: could the evaporator fan motor be the problem?
How do I enter my model number or part number on RepairClinic.com to find the right replacement part?