Choose Product
Identify Problem
03
Find Solutions

Maytag Refrigerator control panel not working

If your Maytag refrigerator control panel is not working, start with the most likely causes and rule them out in order: a failed user control and display board is the top suspect, especially if some buttons stop responding or the display goes dark; next is the dispenser control board when the dispenser system as a whole fails, though test individual dispenser components first before blaming the board; a faulty display board can mimic a dead control panel, so check for power to the display and replace it if it has power but no function; loose, disconnected, or damaged wire harnesses between the panel and control board are a common, repairable fault and should be inspected and reseated; on models with controls built into the dispenser front panel the entire assembly may need replacement; finally, verify incoming power at the outlet and circuit breaker since a power issue can make the refrigerator display not working or fridge buttons not working. Enter your model number on RepairClinic.com to locate the exact replacement part and follow refrigerator control board troubleshooting guides for step by step help.

01 - Maytag Refrigerator User Control and Display Board

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the user control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Maytag Refrigerator Dispenser Control Board

The dispenser control board governs most of the functions of the dispenser system. If only one dispenser part is not working, it is probable that an individual part has failed. In this case, test each of the dispenser components before testing the control board. If the entire dispenser system is not working, the control board is more likely to be at fault.
Top Solution

03 - Maytag Refrigerator Display Board

To determine if the display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the display board might need to be replaced. Additionally, if the display board is not working, check for power to the display board. If the display board has power, but it isn’t working, replace it.
Top Solution

04 - Disconnected or Damaged Wire Harness

The wires from the control panel to the control board may be loose or have become disconnected. Make sure the wire harness connectors are tight. A damaged wire harness will need to be replaced.
Top Solution

05 - Maytag Refrigerator Dispenser Front Panel

On some refrigerator models the user controls are part of the ice and water dispensers front panel. If none of the control panel buttons are working, it's probable the main control board is malfunctioning. However, if some of the buttons on the control panel are still functioning, it's more likely the unit's user control and display is faulty. If this component is sold as part of the dispenser front panel, the entire assembly can be replaced.
Highly Likely

06 - Incoming Power Problem

Ensure power cord is fully inserted into a regular electrical outlet and the outlet is supplying power. Check fuses or circuit breaker if needed. It is best to keep the refrigerator on it's own dedicated circuit and not to use a ground fault receptacle which can interrupt power to large appliances.
Highly Likely

07 - Maytag Refrigerator Main Control Board

The main control board might be defective. However, the control board is rarely at fault for this problem. Before replacing the control board, first check all of the dispenser components. If none of the dispenser components are defective, consider replacing the main control board.
Highly Likely

Frequently Asked Questions

Refrigerator control panel not working — why do some buttons work but others don't?
My refrigerator display is blank. How can I tell if the display board is bad?
Fridge buttons on the dispenser not working — is the dispenser control board bad?
Could a loose wire harness or power issue cause the control panel to stop working?
How do I find and buy the correct replacement control board on RepairClinic.com?