Choose Product
Identify Problem
03
Find Solutions

Caloric Refrigerator coffee maker not working

If your Caloric refrigerator coffee maker is not working, start with the water supply because most failures are caused by no or low water flow. Verify the water supply valve is on, test the fridge water dispenser to confirm you get cold water, and replace the water filter if flow is slow or it has been more than six months. If the water dispenser is working but the brewer still won’t make coffee, remove the brewing module and rinse it; the upper and lower brew pins commonly clog with grounds or mineral buildup and can be cleared carefully with a straightened paper clip. Finally, check that the brewer is installed correctly on the rails with the nameplate facing you, since an improperly seated brewer will not dispense another cup. If you need parts like a water supply tube, replacement filter, brew pin or a new brewing module, enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator.

01 - Caloric Refrigerator Water Supply Tube

Make sure you are getting cold water at the dispenser. If not, check that the water supply to the refrigerator is turned on. If the water flow is slow, try replacing the water filter; the water filter should be replaced every 6 months.
Enter model number to search for the required part specific to your product
Top Solution

02 - Caloric Refrigerator Pin

After each use the brewing module should be removed and rinsed with water. If the upper or lower pin gets clogged, you can use a paper clip to clean out the holes.
Highly Likely

03 - Brewer Not Installed Properly

With the brewing module inserted on the rails, the brewer's name plate must be facing the user and must be removed and reinstalled to dispense another cup.
Less Common

Frequently Asked Questions

Why won't my Caloric refrigerator coffee maker brew or dispense coffee?
My fridge water dispenser not working — could that stop the coffee maker?
How do I clean clogged upper or lower pins in the brewer?
The brewer won’t stay in place or dispense more than one cup — how should it be installed?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?