Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpU-Line Refrigerator RepairU-Line Refrigerator not running Repair

U-Line Refrigerator not running

If your U-Line refrigerator is not running and the display looks dead, start by checking the dispenser control board—failed dispenser or display boards are the most likely culprit, so inspect the board for burn marks and replace it if damaged. Next confirm incoming power: make sure the plug is fully seated, the outlet is supplying power and no breakers or fuses have tripped; avoid using a GFCI for a refrigerator. A failed user control and display board is the next most common cause, followed by a disconnected or damaged wire harness—tighten connectors and replace any frayed wiring. A simple power reset after an outage or surge can sometimes restore operation. The main control board can cause a total shutdown but is less common, so test the other components first before replacing the control board. If you see symptoms like the refrigerator control panel not working, fridge buttons not working, or the refrigerator display not working, use your model number on RepairClinic.com to find the exact replacement part for your specific unit.

01 - U-Line Refrigerator Dispenser Control Board

If the refrigerator display appears completely dead, it's possible the dispenser control board has failed. You should inspect the board for any burn marks and replace it if it appears damaged.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all U-Line Refrigerator Dispenser Control Board Parts
Highly Likely

02 - Incoming Power Problem

Ensure plug is tightly pushed into a regular electrical outlet and the outlet is supplying power. Using a ground fault outlet for a refrigerator is not recommended. Confirm that no circuit breakers have tripped or fuses have blown.
Highly Likely

03 - U-Line Refrigerator User Control and Display Board

If the refrigerator display appears completely dead, it's possible the user control and display board has failed. You should inspect the board for any burn marks and replace it if it appears damaged.
Shop all U-Line Refrigerator User Control and Display Board Parts
Common

04 - Disconnected or Damaged Wire Harness

The wires from the control panel to the control board may be loose or have become disconnected. Make sure the wire harness connectors are tight. A damaged wire harness will need to be replaced.
Common

05 - Power reset

After a power surge or power outage, refrigerator operation could be temporarily affected. Full operation can sometimes be restored through a power reset by either unplugging the appliance's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the refrigerator then switching it back on.
Common

06 - U-Line Refrigerator Control Board

If nothing is working on the refrigerator, it's likely the control board is defective. However, this is almost never the cause. Before replacing the main control board, test all of more commonly defective parts. If none of the other components are defective, consider replacing the control board.
Shop all U-Line Refrigerator Control Board Parts
Less Common

07 - U-Line Refrigerator Main Control Board

If nothing is working on the refrigerator, it's likely the main control board is defective. However, this is almost never the cause. Before replacing the main control board, test all of more commonly defective parts. If none of the other components are defective, consider replacing the main control board.
Shop all U-Line Refrigerator Main Control Board Parts
Less Common

Frequently Asked Questions

Refrigerator display not working — what should I check first?
Fridge buttons not working or display dead — is it the control board?
How do I enter my model number to find the right replacement part on RepairClinic.com?
Can a loose or damaged wire harness cause the refrigerator to stop working?
After a power surge my fridge won't run — will a power reset fix it?