Choose Product
Identify Problem
03
Find Solutions

RCA Ice Maker in refrigerator compartment frosting up

If your RCA ice maker in the refrigerator compartment is frosting up, start by checking the door gasket — a twisted or torn gasket is the most likely cause because it lets warm, moist air into the compartment and creates frost. If the gasket looks good, the next things to check are dispenser components: a defective dispenser solenoid or a bad dispenser door motor can leave the dispenser door closed or slow to close, letting warm air in and causing icing. Also inspect the dispenser funnel guide and the dispenser door itself for obstructions or damage that prevent proper operation, and make sure the dispenser door is not stuck open. These issues can show up as the ice maker not making ice or the ice dispenser not working properly. For troubleshooting, visually inspect seals and moving parts, and use a multimeter to test solenoids or motors for continuity if you’re comfortable. Enter your refrigerator model number on RepairClinic.com to find the exact replacement gasket, solenoid, motor, or dispenser parts that fit your unit.

01 - RCA Refrigerator Door Gasket

A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
Highly Likely

02 - RCA Refrigerator Dispenser Funnel Guide

The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
Common

03 - RCA Refrigerator Dispenser Door Motor

The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
Common

04 - RCA Refrigerator Dispenser Solenoid

The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
Common

05 - RCA Refrigerator Dispenser Door

The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Common

06 - Dispenser door stuck open

If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common

Frequently Asked Questions

Why is my ice maker frosting up or ice maker not making ice?
Freezer working but fridge not cooling — could that cause frosting around the ice maker?
Refrigerator dispenser not working — how do I test the dispenser solenoid or dispenser door motor?
Dispenser door stuck open — what should I check and how do I fix it?
How do I enter my model number or part number on RepairClinic.com to find the right replacement gasket or dispenser part?