Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpHotpoint Refrigerator RepairHotpoint Ice Maker in refrigerator compartment frosting up Repair
Hotpoint Ice Maker in refrigerator compartment frosting up
When frost forms on the ice maker inside the refrigerator compartment, it usually means warm, moist air is getting in. The most likely cause is a compromised door gasket that is torn, twisted, or not sealing; next check the dispenser solenoid, which can fail to open or close the dispenser door and allow moisture into the compartment. After that inspect the dispenser door motor for power and continuity, then look for a clogged or broken funnel guide that can trap ice and cause frosting. A damaged dispenser door can also prevent a proper seal, and less commonly the dispenser door may be stuck open from debris. These issues often cause the ice maker not making ice or the ice dispenser not working, and a quick gasket inspection plus testing the solenoid and motor with a multimeter will narrow the fault. Enter your model number on RepairClinic.com to find the exact replacement part and step-by-step repair instructions for your refrigerator.
01 - Hotpoint Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
Highly Likely
02 - Hotpoint Refrigerator Dispenser Funnel Guide
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
Common
03 - Hotpoint Refrigerator Dispenser Door Motor
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
Common
04 - Hotpoint Refrigerator Dispenser Solenoid
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
Common
05 - Hotpoint Refrigerator Dispenser Door
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Common
06 - Dispenser door stuck open
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
Why is my ice maker frosting up inside the refrigerator?
My freezer is cold but the refrigerator ice maker area is frosting, what should I check?
How do I test a dispenser solenoid or dispenser door motor?
Can a torn refrigerator door gasket cause frost around the ice maker?
How do I find and buy the right replacement part on RepairClinic.com?