Choose Product
Identify Problem
03
Find Solutions

Inglis Ice Maker in refrigerator compartment frosting up

If your Inglis ice maker in the refrigerator compartment is frosting up, the most likely culprit is a faulty door gasket that is letting warm, moist air into the compartment; check the gasket for twists, tears, or gaps and replace it if it does not seal tightly. If the gasket is sound, the next things to check are the dispenser components: a defective dispenser solenoid or a bad dispenser door motor can prevent the door flap from opening or closing properly, which changes airflow and promotes frost and ice buildup. Inspect the dispenser actuator pin, test the solenoid and motor for continuity with a multimeter, and look for a blocked or broken funnel guide or a damaged dispenser door that could trap moisture. Less commonly, the dispenser door may be stuck open, which also allows warm air in and causes frosting and an ice maker not making ice. You can enter your refrigerator model number on RepairClinic.com to find the exact replacement gasket, solenoid, motor, or dispenser parts you need for this repair.

01 - Inglis Refrigerator Door Gasket

A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Inglis Refrigerator Dispenser Funnel Guide

The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
Common

03 - Inglis Refrigerator Dispenser Door Motor

The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
Common

04 - Inglis Refrigerator Dispenser Solenoid

The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
Common

05 - Inglis Refrigerator Dispenser Door

The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Common

06 - Dispenser door stuck open

If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common

Frequently Asked Questions

Why is my ice maker frosting up in the refrigerator compartment?
My freezer is cold but the fridge is warm; could that cause frost on the ice maker?
Ice maker not making ice or dispenser not dispensing ice, could the dispenser door or funnel guide be the problem?
How can I test the dispenser solenoid or dispenser door motor to see if they are bad?
How do I find the correct replacement part for my Inglis refrigerator on RepairClinic.com?