Amana Ice Maker in refrigerator compartment frosting up
If the ice maker inside your refrigerator compartment is frosting up, warm air is getting in and freezing where it shouldn’t. Start by inspecting the door gasket for twists, tears or gaps since a bad seal is the most likely cause of frost buildup; replace a damaged gasket so the fridge door seals properly. If the gasket checks out, look at the dispenser assembly next: a bad dispenser solenoid or a failed dispenser door motor can leave the dispenser door stuck or not operating correctly, and a stuck or broken dispenser door or an obstructed funnel guide can let warm, moist air into the ice maker area. Use a multimeter to test solenoid and motor continuity and make sure the actuator pin and funnel guide move free. Also check whether the dispenser door is stuck open, which will definitely introduce warm air. Enter your model number on RepairClinic.com to find the exact replacement door gasket, solenoid, motor or dispenser parts that fit your Amana refrigerator and get it sealing and operating like new.
01 - Amana Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
My ice maker is frosting up and not making ice. What causes this?
Ice dispenser not working and ice is building up in the compartment. Could a stuck dispenser door or solenoid be the issue?
How do I test the dispenser door motor or solenoid with a multimeter?
How do I know if the refrigerator door gasket is the problem or if it just needs adjustment?
How do I enter my model number or part number at RepairClinic.com to find the correct replacement part?
Unlock the Right Part for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.