Modern Maid Ice Maker in Refrigerator Compartment Not Working

If the ice maker in your refrigerator compartment won’t make or dispense ice, start with the water inlet valve — it’s the most common cause. The valve needs at least 20 psi and electrical power to fill the ice mold, so confirm the water supply and use a multimeter to check for voltage. If pressure and power are good but no fill, replace the inlet valve. Next likely culprits are the dispenser solenoid or dispenser door motor, which must open the chute for ice to pass; test them for continuity and make sure the actuator pin moves freely. A failed compartment fan motor can let temperatures rise and stop ice production, so listen for the fan and test its continuity. Finally check the dispenser funnel guide for jams or damage that block ice. For each suspect part you can test it with a multimeter or visual inspection, then enter your model number on RepairClinic.com to find the exact replacement part and instructions for ice maker repair or ice dispenser not working fixes.

01 - Modern Maid Refrigerator Motor

The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Modern Maid Refrigerator Motor Parts

Common

02 - Modern Maid Refrigerator Fan Motor

Shop all Modern Maid Refrigerator Fan Motor Parts

Common

03 - Modern Maid Refrigerator Dispenser Funnel Guide

The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.

Shop all Modern Maid Refrigerator Dispenser Funnel Guide Parts

Common

04 - Modern Maid Refrigerator Water Inlet Valve

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace th...e water inlet valve.

Shop all Modern Maid Refrigerator Water Inlet Valve Parts

Common

05 - Modern Maid Refrigerator Dispenser Door Motor

The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.

Shop all Modern Maid Refrigerator Dispenser Door Motor Parts

Common

06 - Modern Maid Refrigerator Dispenser Solenoid

The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.

Shop all Modern Maid Refrigerator Dispenser Solenoid Parts

Common

07 - Low Water Pressure from House Supply

The home may have insufficient water pressure. The water inlet valve supplies water to the ice maker and must have strong water pressure to work properly. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.

Common