Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpE-Wave Refrigerator RepairE-Wave Ice Maker in Refrigerator Compartment Not Working Repair
E-Wave Ice Maker in Refrigerator Compartment Not Working
If the ice maker in your refrigerator compartment is not working or not making ice, start with the water inlet valve — it’s the most common reason a refrigerator is not making ice. The valve needs about 20 psi and electrical power to fill the mold; low water pressure or no voltage will keep the ice maker from filling. If the inlet valve checks out, the next likely causes are the dispenser solenoid or dispenser door motor, which must open the flap so ice can drop; test them for continuity and make sure the actuator pin moves freely. A failed compartment fan motor can also raise the temperature enough that the ice maker won’t make ice, so confirm the fan runs when it should. Finally, inspect the dispenser funnel guide and chute for jams or broken parts that keep ice from dispensing. If you need replacement parts, enter your model number at RepairClinic.com to find the exact part for your refrigerator and get the right component for the repair.
01 - E-Wave Refrigerator Water Inlet Valve
The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace th...
Enter model number to search for the required part specific to your product
Common
02 - E-Wave Refrigerator Dispenser Solenoid
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
Common
03 - E-Wave Refrigerator Fan Motor
The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
Common
04 - E-Wave Refrigerator Dispenser Door Motor
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
Common
05 - E-Wave Refrigerator Motor
The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
Common
06 - E-Wave Refrigerator Dispenser Funnel Guide
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
Common
07 - Low Water Pressure from House Supply
The home may have insufficient water pressure. The water inlet valve supplies water to the ice maker and must have strong water pressure to work properly. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common
Frequently Asked Questions
Why is my ice maker not making ice?
Ice dispenser not working even though the ice maker has ice, what should I check?
My water dispenser and ice maker won’t fill. How do I test the water inlet valve?
The freezer is cold but the ice maker compartment seems warm. Could that stop ice production?
How do I enter my model number on RepairClinic.com to find the right replacement part?