Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpMagic Chef Oven RepairMagic Chef Range display board not working Repair

Magic Chef Range display board not working

When your Magic Chef range display is not working, the oven display may be completely blank, dim, or missing digits while the range still has power. The most likely cause is a faulty oven control board, especially when the board has power but the display is dead. A defective display board can cause the same symptoms, although it may not be receiving power from the main control board. If only part of the display is visible or the digits are dim, the LED board is more likely to have failed. A bad main control board can also prevent power from reaching the display board. Before replacing parts, check that the range is plugged in securely, the outlet works, and no circuit breaker has tripped or fuse has blown. A locked control panel, child lock, or Sabbath mode can also make the oven control panel appear unresponsive. These issues cover common oven display not working, range display not working, and oven digital display not working problems. Enter your Magic Chef range model number to find the exact replacement oven control board, display board, LED board, or main control board for your appliance.

01 - Magic Chef Range/Stove/Oven Oven Control Board

The oven control board displays the time, temperature, and settings for the range. If the oven control board has power to it but the display is dead, missing digits or dim, it will need to be replaced.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all Magic Chef Range/Stove/Oven Oven Control Board Parts
Top Solution

02 - Magic Chef Range/Stove/Oven Display Board

If the display board is dead it may not be getting power from the main control board. If there is power to the display board but the display is dead, missing digits or dim, it will need to be replaced.
Shop all Magic Chef Range/Stove/Oven Display Board Parts
Top Solution

03 - Magic Chef Range/Stove/Oven LED Board

The range's LED board will usually display the time, temperature, and settings for the range. If the display only partially shows digits or is dim, it's likely the LED board is faulty and should be replaced (if the whole display is not working, a defective control board is more likely the cause of the problem).
Shop all Magic Chef Range/Stove/Oven LED Board Parts
Highly Likely

04 - Magic Chef Range/Stove/Oven Main Control Board

The main control board sends power to the display board to operate. If the display board is not receiving power, the main control board is likely bad and will need to be replaced.
Shop all Magic Chef Range/Stove/Oven Main Control Board Parts
Highly Likely

05 - Incoming Power Problem

Ensure plug is tightly pushed into electrical outlet and outlet is supplying power. If the display board is not working, there could be an incoming power problem. A gas range has power if the oven light comes on and the burner sparks; an electric range has power if the surface elements turn on. If the range does not have power, check for a tripped circuit breaker or blown fuses and correct as needed.
Common

06 - Range in lock mode

Many ranges have a child lock or "Sabbath" feature which will prevent the buttons from being used when the feature is engaged. Consult the range's user manual for information regarding locking/unlocking the control panel.
Common

07 - Power reset

After a power surge or power outage, range operation could be temporarily affected. Full operation can sometimes be restored through a power reset by turning the power to the appliance off for a few minutes and then back on.
Common

Frequently Asked Questions

Why is my Magic Chef range display not working?
What should I check before replacing the Magic Chef oven control board?
Why does my Magic Chef oven display have missing segments or look dim?
How do I know whether the Magic Chef display board or main control board is bad?
How do I find the correct Magic Chef display or control board for my range?