Choose Product
Identify Problem
03
Find Solutions

Range display board not working

An oven display is not working, the range display is missing segments, or the oven control panel is not responding, the oven control board is the most likely cause, especially when the range has power but the digital display is dead, dim, or missing digits. The control board operates the time, temperature, and settings, and usually needs replacement when the display fails. Next, check the display board itself. It may not be receiving power from the main control board, or the display board may be faulty. If only part of the display is dim or missing, a defective LED board is more likely. A failed main control board can also stop power from reaching the display board. Before replacing a part, verify that the range is plugged in and the outlet works. Check the circuit breaker or fuses. A gas range has power if the oven light works or a burner sparks, while an electric range has power if the surface elements turn on. Finally, make sure child lock or Sabbath mode is not preventing the buttons from working. Enter your model number to find the exact replacement control board, display board, or LED board for your range.

01 - Range/Stove/Oven Oven Control Board

The oven control board displays the time, temperature, and settings for the range. If the oven control board has power to it but the display is dead, missing digits or dim, it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Range/Stove/Oven Display Board

If the display board is dead it may not be getting power from the main control board. If there is power to the display board but the display is dead, missing digits or dim, it will need to be replaced.
Top Solution

03 - Range/Stove/Oven LED Board

The range's LED board will usually display the time, temperature, and settings for the range. If the display only partially shows digits or is dim, it's likely the LED board is faulty and should be replaced (if the whole display is not working, a defective control board is more likely the cause of the problem).
Highly Likely

04 - Range/Stove/Oven Main Control Board

The main control board sends power to the display board to operate. If the display board is not receiving power, the main control board is likely bad and will need to be replaced.
Highly Likely

05 - Incoming Power Problem

Ensure plug is tightly pushed into electrical outlet and outlet is supplying power. If the display board is not working, there could be an incoming power problem. A gas range has power if the oven light comes on and the burner sparks; an electric range has power if the surface elements turn on. If the range does not have power, check for a tripped circuit breaker or blown fuses and correct as needed.
Common

06 - Range in lock mode

Many ranges have a child lock or "Sabbath" feature which will prevent the buttons from being used when the feature is engaged. Consult the range's user manual for information regarding locking/unlocking the control panel.
Common

07 - Power reset

After a power surge or power outage, range operation could be temporarily affected. Full operation can sometimes be restored through a power reset by turning the power to the appliance off for a few minutes and then back on.
Common

Frequently Asked Questions

Why is my range display not working or showing no power?
Why does my oven display have missing segments or look dim?
Can a locked range make the oven control panel stop working?
How do I know whether the display board or main control board is bad?
How do I order the correct replacement part for my oven display?