Choose Product
Identify Problem
03
Find Solutions

Ikea Microwave display not working

If your IKEA microwave display is not working, start by pressing every button on the control panel. When the microwave screen is blank, dark, or the microwave clock display is not working and none of the buttons respond correctly, the control module is the most likely cause and may need replacement. On models without a separate display board, a defective touchpad and control panel can cause the same symptom. If the display is partially missing segments, the display board is more commonly defective. If the display is completely out, the main control board or display board could be at fault. Also confirm the microwave is plugged in and the wall receptacle has power, then check whether the circuit breaker has tripped. A control board with power but no display may need replacement. Enter your IKEA microwave model number to find the exact control module, touchpad, main control board, or display board for your appliance. Any repair that requires removing the outer cabinet must be handled carefully because the high-voltage capacitor can store a lethal charge even after the microwave is unplugged. Proper capacitor discharge is required before interior work, so use a qualified technician if you are unfamiliar with the procedure.

01 - Ikea Microwave Control Module

A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Ikea Microwave Touchpad and Control Panel

If the microwave does not have a separate display board, then the display not working is likely caused by a defective touchpad and control panel.
Top Solution

03 - Ikea Microwave Main Control Board

If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Top Solution

04 - Ikea Microwave Display Board

If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Top Solution

05 - Incoming Power Problem

Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely

06 - Ikea Microwave Control Board

Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.
Common

07 - Power reset

A microwave display not working may be due to a power outage or power surge. Full operation can sometimes be restored through a power reset by either unplugging the unit's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the microwave then switching it back on.
Common

Frequently Asked Questions

Why is my IKEA microwave display not working or completely blank?
Why is my IKEA microwave display missing segments or only partly working?
Can a microwave touchpad or control panel cause the display to stop working?
How do I safely test an IKEA microwave when the display is dark?
How do I find the correct IKEA microwave display board or control module?