Choose Product
Identify Problem
03
Find Solutions

Universal Microwave display not working

Is your Universal microwave display not working? The control module is the most likely cause, especially when the control panel buttons are also unresponsive. If your microwave does not use a separate display board, a defective touchpad and control panel can cause the same problem. A display that is partially blank or missing segments more commonly points to a faulty display board, while a display that is completely dark may involve the main control board or display board. Before replacing parts, confirm the microwave is plugged in, test the wall receptacle with another appliance, and check for a tripped circuit breaker. If the control board has power but the digital display remains off, the control board may need replacement. Enter your model number to find the exact replacement control module, touchpad, main control board, or display board for your specific microwave. Any repair that requires opening the outer cabinet must be handled carefully. The high-voltage capacitor can store a lethal charge even after the microwave is unplugged, so it must be properly discharged before interior work. If you are not familiar with capacitor discharge procedures, have a qualified technician perform the repair.

01 - Universal Microwave Control Module

A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Universal Microwave Touchpad and Control Panel

If the microwave does not have a separate display board, then the display not working is likely caused by a defective touchpad and control panel.
Top Solution

03 - Universal Microwave Main Control Board

If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Top Solution

04 - Universal Microwave Display Board

If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Top Solution

05 - Incoming Power Problem

Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely

06 - Universal Microwave Control Board

Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.
Common

07 - Power reset

A microwave display not working may be due to a power outage or power surge. Full operation can sometimes be restored through a power reset by either unplugging the unit's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the microwave then switching it back on.
Common

Frequently Asked Questions

Why is my Universal microwave display not working?
Why is my microwave screen blank but the microwave has power?
What causes a microwave display to go out partially or show missing segments?
How do I find the correct microwave display or control board replacement part?
Is it safe to repair a microwave with no display?