Choose Product
Identify Problem
03
Find Solutions

Crosley Microwave display not working

Is your Crosley microwave display not working, showing a blank screen, or missing segments from the clock display? Start by testing every button on the control panel. If the microwave buttons are unresponsive or none operate correctly, the control module is the most likely failure and may need replacement. If your model does not use a separate display board, a defective touchpad and control panel can cause the microwave screen not working symptom. When only part of the display is out, the display board is more commonly at fault. If the display is completely dark, either the display board or main control board could be defective. Also confirm the microwave is plugged in, test the wall receptacle with another small appliance, and check the circuit breaker. A control board can also fail when it has power but does not operate the digital display. Enter your model number to find the exact replacement control module, touchpad, display board, or main control board for your Crosley microwave. Replacing these parts may require opening the outer cabinet. Unplug the microwave first, and remember that the high-voltage capacitor can store a lethal charge even after power is removed. Proper capacitor discharge is required before interior work, so use a qualified technician if you are not familiar with that procedure.

01 - Crosley Microwave Control Module

A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Crosley Microwave Touchpad and Control Panel

If the microwave does not have a separate display board, then the display not working is likely caused by a defective touchpad and control panel.
Top Solution

03 - Crosley Microwave Main Control Board

If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Top Solution

04 - Crosley Microwave Display Board

If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Top Solution

05 - Incoming Power Problem

Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely

06 - Crosley Microwave Control Board

Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.
Common

07 - Power reset

A microwave display not working may be due to a power outage or power surge. Full operation can sometimes be restored through a power reset by either unplugging the unit's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the microwave then switching it back on.
Common

Frequently Asked Questions

Why is my Crosley microwave display not working or completely blank?
Why is my microwave display missing segments or only partly working?
Can a bad touchpad cause my microwave display and buttons not to work?
How do I know whether the problem is the power supply, a fuse, or the control board?
How do I find the correct Crosley microwave display or control board replacement part?