Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpEstate Microwave RepairEstate Microwave display not working Repair

Estate Microwave display not working

If your Estate microwave display is not working, first check whether the wall receptacle has power and confirm the microwave is plugged in and the circuit breaker has not tripped. A defective control module is the most likely cause, especially if the microwave screen is blank or dark and none of the buttons respond correctly. If your model does not use a separate display board, a failed touchpad and control panel can cause the same problem. When the microwave display goes out partially or shows missing segments, the display board is more commonly at fault. A completely dead display may be caused by the main control board or display board, while a control board with power but no working digital display may also need replacement. Before ordering, enter your model number to find the exact replacement part for your Estate microwave. Any repair that requires opening the outer cabinet must be handled carefully because the high-voltage capacitor can store a lethal charge even after the microwave is unplugged. It must be properly discharged before interior work, and readers unfamiliar with capacitor discharge procedures should use a qualified technician.

01 - Estate Microwave Control Module

A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all Estate Microwave Control Module Parts
Top Solution

02 - Estate Microwave Touchpad and Control Panel

If the microwave does not have a separate display board, then the display not working is likely caused by a defective touchpad and control panel.
Shop all Estate Microwave Touchpad and Control Panel Parts
Top Solution

03 - Estate Microwave Main Control Board

If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Shop all Estate Microwave Main Control Board Parts
Top Solution

04 - Estate Microwave Display Board

If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Shop all Estate Microwave Display Board Parts
Top Solution

05 - Incoming Power Problem

Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely

06 - Estate Microwave Control Board

Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.
Shop all Estate Microwave Control Board Parts
Common

07 - Power reset

A microwave display not working may be due to a power outage or power surge. Full operation can sometimes be restored through a power reset by either unplugging the unit's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the microwave then switching it back on.
Common

Frequently Asked Questions

Why is my Estate microwave display not working?
Why is my Estate microwave not working but has power?
What should I check if my Estate microwave buttons are not working and the display is blank?
Why is only part of my Estate microwave display missing?
How do I find the correct Estate microwave display replacement part?