Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpMagic Chef Microwave RepairMagic Chef Microwave display not working Repair

Magic Chef Microwave display not working

If your Magic Chef microwave display is not working, start by pressing every control-panel button. If the buttons are also unresponsive, the control module is the most likely cause and may need replacement. On models without a separate display board, a defective touchpad and control panel can cause the microwave screen to go blank. If only some segments or numbers are missing, the display board is more commonly at fault. A completely dark microwave display can also result from a failed main control board or display board. Before replacing parts, confirm the microwave is plugged in and test the wall receptacle with another small appliance, then check the circuit breaker. If the control board has power but the digital display remains off, the control board may be defective. Enter your Magic Chef microwave model number to find the exact replacement control module, touchpad, main control board, or display board for your appliance. Any repair that requires opening the outer cabinet must be approached carefully. The high-voltage capacitor can store a lethal charge even after the microwave is unplugged and must be properly discharged before interior work. If you are not familiar with capacitor discharge procedures, have a qualified technician perform the repair.

01 - Magic Chef Microwave Control Module

A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all Magic Chef Microwave Control Module Parts
Top Solution

02 - Magic Chef Microwave Touchpad and Control Panel

If the microwave does not have a separate display board, then the display not working is likely caused by a defective touchpad and control panel.
Shop all Magic Chef Microwave Touchpad and Control Panel Parts
Top Solution

03 - Magic Chef Microwave Main Control Board

If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Shop all Magic Chef Microwave Main Control Board Parts
Top Solution

04 - Magic Chef Microwave Display Board

If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Shop all Magic Chef Microwave Display Board Parts
Top Solution

05 - Incoming Power Problem

Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely

06 - Magic Chef Microwave Control Board

Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.
Shop all Magic Chef Microwave Control Board Parts
Common

07 - Power reset

A microwave display not working may be due to a power outage or power surge. Full operation can sometimes be restored through a power reset by either unplugging the unit's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the microwave then switching it back on.
Common

Frequently Asked Questions

Why is my Magic Chef microwave display not working but the microwave has power?
What should I check if my Magic Chef microwave screen is blank or the clock display is not working?
Can I test a Magic Chef microwave control board or touchpad with a multimeter?
How do I find the correct Magic Chef microwave display board or control panel replacement?
Is it safe to use my Magic Chef microwave when the display is not working?