Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpAdmiral Microwave RepairAdmiral Microwave display not working Repair

Admiral Microwave display not working

An Admiral microwave display is not working, first check that the power cord is plugged in and the wall receptacle has power by testing it with another small appliance. If the outlet works but the microwave screen is blank, clock display is dark, or display segments are missing, press each control panel button. If the microwave buttons are also unresponsive, the control module is the most likely cause, followed by the touchpad and control panel on models without a separate display board. A partially working display more commonly indicates a defective display board. If the display is completely out, the main control board or display board may be at fault. A control board that has power but does not operate the digital display may also need replacement. Enter your Admiral microwave model number to find the exact replacement part for your appliance. Any repair that requires removing the outer cabinet must be handled carefully because the high-voltage capacitor can store a lethal charge even after the microwave is unplugged. Proper capacitor discharge is required before interior work, and a qualified technician should perform the repair if you are not familiar with that procedure.

01 - Admiral Microwave Touchpad and Control Panel

If the microwave does not have a separate display board, then the display not working is likely caused by a defective touchpad and control panel.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all Admiral Microwave Touchpad and Control Panel Parts
Top Solution

02 - Admiral Microwave Control Module

A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Shop all Admiral Microwave Control Module Parts
Top Solution

03 - Admiral Microwave Main Control Board

If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Shop all Admiral Microwave Main Control Board Parts
Top Solution

04 - Admiral Microwave Display Board

If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Shop all Admiral Microwave Display Board Parts
Top Solution

05 - Incoming Power Problem

Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely

06 - Admiral Microwave Control Board

Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.
Shop all Admiral Microwave Control Board Parts
Common

07 - Power reset

A microwave display not working may be due to a power outage or power surge. Full operation can sometimes be restored through a power reset by either unplugging the unit's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the microwave then switching it back on.
Common

Frequently Asked Questions

Why is my Admiral microwave display not working but the microwave has power?
What should I check if my Admiral microwave screen is blank or missing segments?
Can a bad touchpad cause my Admiral microwave display or buttons to stop working?
How do I safely test the fuse when my Admiral microwave is not working or has no display?
How do I find the correct Admiral microwave display board or control board replacement?