Dryer WiFi not working

If your dryer WiFi is not working, start with the basics: the most likely cause is an incorrect network password, so double check the password entered in the app. Next, confirm the router is on and actually connected to the internet; plug a lamp into the same outlet, reboot the router, and contact your internet provider if the router still has no power or no internet. Also make sure you selected the correct home network in the app rather than a neighbor or a guest network, and if your network does not appear try entering the SSID and password manually. Finally, poor signal can stop the dryer from connecting, so move the router closer or use a WiFi extender if needed. If status lights or the start button are flashing during setup, that often points to a network or setup error. When you need replacement parts for mountable antennas, control boards, or wiring, enter your model number at RepairClinic.com to find the exact part for your dryer.

01 - Incorrect Password

Verify the password associated with the dryer is correct.

Highly Likely

02 - Router Not On or Not Working

Check the router to confirm it is plugged in and the power, internet, and WiFi lights are on. If not, confirm the wall outlet has power by plugging in a known working appliance. If there is power at the outlet, try turning the router power switch off and back on to see if the router will reset. If the router is still not working consult your internet provider.

Highly Likely

03 - Wrong Home Network was Chosen

Verify the correct network and password was chosen. If your home network does not show up in the app, choose the"Other" option and enter the network name and password manually.

Highly Likely