Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpGE Dryer RepairGE Dryer leaking water Repair
GE Dryer leaking water
If your GE dryer is leaking water or you see water underneath the machine, start by checking the fill hose and its connections—the most common cause is a cracked or loose fill hose or missing rubber washers where the hose meets the inlet valve. If water appears inside the drum, inspect the steam nozzle for cracks or clogs and replace it if damaged. If your dryer is a non-steam model, rule out other household leaks near the unit. A cracked steam generator housing or a failing steam generator can also drip into the drum, and loose hose connectors will let water escape at fittings. Less commonly, a damaged water inlet valve housing will leak inside the cabinet and will need replacement. Look for visible cracks, damp spots, and loose fittings, tighten connections, and swap any worn hoses, washers, nozzles, or valves. Enter your model number on RepairClinic.com to find the exact replacement part for your specific dryer.
01 - GE Dryer Fill Hose
A water leak that is coming from outside the dryer cabinet may be caused by a damaged fill hose. Inspect the hose for small cracks or holes and confirm the hose is secured firmly to the inlet valve. A damaged hose will need to be replaced with a new one. If needed, install new rubber washers at the ends of the hose for a water tight seal.
Enter model number to search for the required part specific to your product
Top Solution
02 - GE Dryer Nozzle
A water leak inside the dryer drum may be caused by a faulty nozzle, the component used to spray the hot mist. Inspect the nozzle for any cracks or signs of visible damage and replace the old nozzle with a new one if required.
Highly Likely
03 - Check for other sources of leaks
A non steam dryer is not connected to water and will not cause a leak. Look for other sources of leaks.
Common
04 - GE Dryer Steam Generator
A water leak inside the dryer drum may be caused by a faulty or damaged steam generator, the component that converts the incoming water supply to steam. Inspect the steam generator for any cracks in the housing and replace if visibly damaged.
Common
05 - Loose hose connector
Check and tighten hose connections. Install new rubber washers if needed.
Common
06 - GE Dryer Water Inlet Valve
A water leak that is coming from inside the dryer cabinet is likely caused by a damaged water inlet valve. Inspect the valve for any cracks in the housing and confirm the valve hoses are secured firmly to the valve and are in good condition. If the inlet valve's housing is cracked or damaged, the component should be replaced with a new one.
Less Common
Frequently Asked Questions
Why is my dryer leaking water?
My dryer leaks water inside the drum when I run the steam cycle. What parts should I check?
I have a non-steam dryer leaking water. Could the dryer be the source?
How do I fix a loose hose connector or replace a damaged fill hose?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?