Electrolux Dishwasher buttons/controls not working
If your Electrolux dishwasher buttons are not working, start with the control panel and touchpad. When the display is on but some buttons respond and others do not, the most likely problem is a failed touchpad or the touchpad and control panel assembly. If the dishwasher control panel is not working at all and there are no lights or sounds, check for an incoming power problem first, including a tripped breaker, GFCI outlet, blown fuse, or loose power connection. It is also worth making sure the dishwasher is not in lock mode, child lock, Sabbath mode, or Demo mode, since any of those can make it seem like the dishwasher touchpad is not responding. If the controls still will not start a cycle, inspect the door latch and the door switch or microswitch inside it, because a bad latch can keep the dishwasher from recognizing that the door is closed. The main control board can also cause dishwasher controls not working, but it is less common and should be checked after the other parts. Enter your model number on RepairClinic.com to find the exact Electrolux replacement part for your dishwasher.
01 - Electrolux Dishwasher Touchpad
First, confirm that the dishwasher display is working. If the display is still working, try pressing some of the touchpad buttons. If some of the buttons respond correctly but others don’t, it is likely that the touchpad is at fault. (Some manufacturers sell the touchpad separately from the control panel. Other manufacturers require that you purchase the touchpad and control panel together. If you cannot replace the touchpad individually, replace the touchpad and control panel.)
Enter model number to search for the required part specific to your product
02 - Electrolux Dishwasher Touchpad and Control Panel
First, ensure that the display works. If the dishwasher display is working but the some of the button don’t respond correctly, the touchpad and control panel might need to be replaced. (Some manufacturers sell the touchpad separately from the control panel. Other manufacturers require that you purchase the touchpad and control panel together. If you cannot replace the touchpad individually, replace the touchpad and control panel.)
If there are no indicator lights or any noise from the dishwasher when it is turned on, it is likely that power is not reaching the dishwasher. Check the circuit breakers and GFCI (ground-fault circuit interrupter) outlets, if applicable, to confirm they have not tripped, or inspect any fuses to confirm none have blown. Plugging the unit’s power cord into a ground fault outlet is not recommended, but such an outlet can be reset to restore power by pressing in the button on the faceplate.
Top Solution
04 - Dishwasher in lock mode
Many dishwashers have a child lock or “Sabbath” feature which will prevent the buttons from being used when the feature is engaged. The dishwasher could also be in “Demo” mode or another mode which prevents full operation. Consult the dishwasher’s user manual for information regarding locking/unlocking the control panel.
Top Solution
05 - Electrolux Dishwasher Door Latch
If the dishwasher buttons aren't working, it's possible the door latch is malfunctioning and preventing a wash cycle from being started. Inspect the door latch for any damage. you can also use a multimeter to test the micro switch inside the door latch for electrical continuity. If the switch does not have continuity, the switch or latch assembly should be replaced.
The main control board regulates nearly every function in the dishwasher. If there is a problem with the main control board, it might not send voltage to the dishwasher touchpad, causing the touchpad buttons not to work. Control boards are often misdiagnosed; make sure you test more commonly defective parts before replacing the main control board.
The control board regulates nearly every function in the dishwasher. If there is a problem with the control board, it might not send voltage to the dishwasher touchpad, causing the touchpad buttons not to work. Control boards are often misdiagnosed; make sure you test more commonly defective parts before replacing the control board.