In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Middle Drawer Frame Replacement WR32X26246 
GE Refrigerator Middle Drawer Frame Replacement WR32X26246
Total Parts Cost
$NaN03:14
- Description
This video provides step-by-step repair instructions for replacing the middle drawer frame on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the middle drawer frame in this GE refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Open the refrigerator door and fully remove the middle drawer.
4
Next, remove the glass shelf from the middle drawer frame.
5
Now lift the front of the old frame up and pull forward to remove.
6
Next, depress the tab to detach the humidity control lever from the frame.
7
Insert the small flat-head screwdriver into the slots to release the tabs securing the humidity control slide.
8
Use the phillips-head screwdriver to unthread the screws to remove the left and right side support rollers from the frame.
9
To prepare the new middle drawer frame for installation…
10
… transfer the front and rear gaskets from the old frame to the new one.
11
Position each support roller and thread the screw to secure.
12
Install the humidity control slide by aligning the rear edge under the retaining tabs then press the front edge in until it snaps into place.
13
Install the humidity control lever by inserting the actuator tab into the upper slot, align it with the slide, then snap the lever’s retaining tab into the lower slot.
14
Now align the frame’s rear notches over the rear liner support posts and lower the frame onto the front posts.
15
Insert the glass shelf into the new frame.
16
Replace the middle drawer…
17
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the middle drawer frame on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the middle drawer frame in this GE refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Open the refrigerator door and fully remove the middle drawer.
4
Next, remove the glass shelf from the middle drawer frame.
5
Now lift the front of the old frame up and pull forward to remove.
6
Next, depress the tab to detach the humidity control lever from the frame.
7
Insert the small flat-head screwdriver into the slots to release the tabs securing the humidity control slide.
8
Use the phillips-head screwdriver to unthread the screws to remove the left and right side support rollers from the frame.
9
To prepare the new middle drawer frame for installation…
10
… transfer the front and rear gaskets from the old frame to the new one.
11
Position each support roller and thread the screw to secure.
12
Install the humidity control slide by aligning the rear edge under the retaining tabs then press the front edge in until it snaps into place.
13
Install the humidity control lever by inserting the actuator tab into the upper slot, align it with the slide, then snap the lever’s retaining tab into the lower slot.
14
Now align the frame’s rear notches over the rear liner support posts and lower the frame onto the front posts.
15
Insert the glass shelf into the new frame.
16
Replace the middle drawer…
17
… and the refrigerator should be ready for use.
Applicable Product Model
Related Articles & Videos