Video & Articles: Appliance & Equipment RepairFrigidaire Laundry Center Washer Lid Spring Replacement (134890500)

Frigidaire Laundry Center Washer Lid Spring Replacement (134890500)

02:14
This video provides step-by-step repair instructions for replacing the washer lid spring on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.

This replacement video is applicable to the following brands:
Frigidaire

Don't forget to like and comment on this video and subscribe to our channel!

Step By Step Instructions

1
To replace a washer lid spring in your frigidaire laundry center…
2
… you will need a putty knife.
3
Before you begin the procedure, unplug the power cord.
4
Use the putty knife to release the two retaining clips securing the washer’s main top.
5
Lift up the top and disconnect the lid lock assembly wire connecter.
6
You can now fully remove the main top…
7
…and set it upside down on a towel or blanket.
8
Release the tension on the lid springs and detach the spring you’re replacing from the main top and hinge bar, if still intact.
9
To install the new washer lid spring…
10
… attach the shorter end of the spring to the hinge bar… and the longer end to the main top.
11
Returning to the appliance…
12
… reinstall the main top by first reconnecting the lid lock assembly wire connecter.
13
Secure the wire in the retaining clip.
14
Now slide the rear of the main top under the rear retaining clips…
15
… then realign the main top and push down to snap it into position.
16
Plug the power cord back in…
17
… and your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the washer lid spring on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.

This replacement video is applicable to the following brands:
Frigidaire

Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace a washer lid spring in your frigidaire laundry center…
2
… you will need a putty knife.
3
Before you begin the procedure, unplug the power cord.
4
Use the putty knife to release the two retaining clips securing the washer’s main top.
5
Lift up the top and disconnect the lid lock assembly wire connecter.
6
You can now fully remove the main top…
7
…and set it upside down on a towel or blanket.
8
Release the tension on the lid springs and detach the spring you’re replacing from the main top and hinge bar, if still intact.
9
To install the new washer lid spring…
10
… attach the shorter end of the spring to the hinge bar… and the longer end to the main top.
11
Returning to the appliance…
12
… reinstall the main top by first reconnecting the lid lock assembly wire connecter.
13
Secure the wire in the retaining clip.
14
Now slide the rear of the main top under the rear retaining clips…
15
… then realign the main top and push down to snap it into position.
16
Plug the power cord back in…
17
… and your laundry center should be ready for use.

Applicable Product Model

icons/washer dryer combo
Model
Subtype
Product Diagram & Manuals
Parts Needed
Spring
Spring
$16.09
Total$0.00

Related Articles & Videos

07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)