In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Dishwasher Top Rack Rail Roller Support Replacement A00204701 
Electrolux Dishwasher Top Rack Rail Roller Support Replacement A00204701
Skill Level
Total Parts Cost
$63.81Estimated Savings
$112.5005:50
- Description
This video provides step-by-step instructions for replacing the top rack rail roller support on Electrolux dishwasher.
All of the information in this top rack rail roller support replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver, Channel-lock pliers.
All of the information in this top rack rail roller support replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver, Channel-lock pliers.
Step By Step Instructions
1
Electrolux Dishwasher - 24ID75SPS3A
2
Dishwasher Top Rack Rail Roller Support Replacement
3
"Heavy, Sharp, Shock, Water"
4
You will need to fully uninstall the appliance
5
"Shock, Water"
6
Turn off the power and water supply to the appliance
7
"Using a phillips-head screwdriver, unthread the two mounting screws securing the lower access panel"
8
Sharp
9
Set the panel aside
10
Use channel-lock pliers to loosen the elbow fitting securing the water supply line to the inlet valve
11
Fully unthread the elbow fitting--be prepared for spilled water
12
Disconnect the drain hose from the sink or garbage disposer and feed it through the cabinet
13
Open the dishwasher door and unthread the two screws securing the dishwasher mounting brackets
14
"To move the dishwasher, you may need to adjust the legs to lower the appliance. Rotate the front legs clockwise to lower the front"
15
"Using the phillips-head screwdriver, rotate the rear leg adjusting rod counter-clockwise to lower the rear"
16
Heavy
17
Gently pull the dishwasher away from the cabinet
18
Place a weight on top of the dishwasher to help stabilize it
19
Pull the top rack out
20
Sharp
21
Release the retaining tabs to remove the front stop clips
22
Slide the rack off the rails
23
Release the retaining tabs to remove the rear stop clip and slide out the appropriate rail
24
Lift up the insulation and unthread the two screws securing the rollers and support
25
Align the new rollers on the inside of the side panel and the new support on the outside of the panel
26
Thread the screws to secure
27
"Keeping the stop tab at the front, realign the rail on the rollers"
28
Snap the rear stop clip into place
29
Align the utensil tray support brackets on the rails and slide the rack in
30
Realign the two front stop clips on the rails and snap them into place
31
Realign the insulation and remove the weight
32
Confirm that the end of the drain hose is accessible through the cabinet wall and the water supply line is positioned in the channel in the base
33
Heavy
34
Gently slide the dishwasher back into the cabinet
35
Extend the front leveling legs if necessary
36
Rotate the screws to secure the mounting brackets to the cabinet or countertop and connect it to the sink drain or disposer
37
Make sure the hose is elevated above the connection point
38
Thread the water supply line elbow fitting onto the inlet valve port and tighten
39
Realign the lower access panel and rethread the screws to secure
40
"Shock, Water"
41
Turn the water supply and power back on
Description
This video provides step-by-step instructions for replacing the top rack rail roller support on Electrolux dishwasher.
All of the information in this top rack rail roller support replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver, Channel-lock pliers.
All of the information in this top rack rail roller support replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver, Channel-lock pliers.
Step-By-Step Instructions
1
Electrolux Dishwasher - 24ID75SPS3A
2
Dishwasher Top Rack Rail Roller Support Replacement
3
"Heavy, Sharp, Shock, Water"
4
You will need to fully uninstall the appliance
5
"Shock, Water"
6
Turn off the power and water supply to the appliance
7
"Using a phillips-head screwdriver, unthread the two mounting screws securing the lower access panel"
8
Sharp
9
Set the panel aside
10
Use channel-lock pliers to loosen the elbow fitting securing the water supply line to the inlet valve
11
Fully unthread the elbow fitting--be prepared for spilled water
12
Disconnect the drain hose from the sink or garbage disposer and feed it through the cabinet
13
Open the dishwasher door and unthread the two screws securing the dishwasher mounting brackets
14
"To move the dishwasher, you may need to adjust the legs to lower the appliance. Rotate the front legs clockwise to lower the front"
15
"Using the phillips-head screwdriver, rotate the rear leg adjusting rod counter-clockwise to lower the rear"
16
Heavy
17
Gently pull the dishwasher away from the cabinet
18
Place a weight on top of the dishwasher to help stabilize it
19
Pull the top rack out
20
Sharp
21
Release the retaining tabs to remove the front stop clips
22
Slide the rack off the rails
23
Release the retaining tabs to remove the rear stop clip and slide out the appropriate rail
24
Lift up the insulation and unthread the two screws securing the rollers and support
25
Align the new rollers on the inside of the side panel and the new support on the outside of the panel
26
Thread the screws to secure
27
"Keeping the stop tab at the front, realign the rail on the rollers"
28
Snap the rear stop clip into place
29
Align the utensil tray support brackets on the rails and slide the rack in
30
Realign the two front stop clips on the rails and snap them into place
31
Realign the insulation and remove the weight
32
Confirm that the end of the drain hose is accessible through the cabinet wall and the water supply line is positioned in the channel in the base
33
Heavy
34
Gently slide the dishwasher back into the cabinet
35
Extend the front leveling legs if necessary
36
Rotate the screws to secure the mounting brackets to the cabinet or countertop and connect it to the sink drain or disposer
37
Make sure the hose is elevated above the connection point
38
Thread the water supply line elbow fitting onto the inlet valve port and tighten
39
Realign the lower access panel and rethread the screws to secure
40
"Shock, Water"
41
Turn the water supply and power back on
Applicable Product Model
Parts Needed
Dishrack Guide
$63.81
Total$0.00
Related Articles & Videos
00:56
Part Replacement
Electrolux Dishwasher Upper Dishrack Tine Clip Replacement A00141702