In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Dispenser Lever Replacement #241682001
Frigidaire Refrigerator Dispenser Lever Replacement #241682001
Skill Level
Total Parts Cost
$46.56Estimated Savings
$112.5002:35
- Description
This video provides step-by-step repair instructions for replacing the dispenser lever (or water dispenser actuator) on a Frigidaire refrigerator. The most common reason for replacing the dispenser lever is when it is damaged or broken.
All of the information for this dispenser lever replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Crosley, Gibson
Tools needed: screwdriver
All of the information for this dispenser lever replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Crosley, Gibson
Tools needed: screwdriver
Step By Step Instructions
1
In this video, we will show one or more of these icons to alert you when to use caution, as with any repair.
2
Be sure you unplug the appliance before beginning.
3
Your first step is to pull off the drip tray and remove the dispenser cover screws.
4
Next, lift the cover up and off.
5
Then, disconnect the wire harness.
6
Remove the screws securing the dispenser control module.
7
Pull the water supply tube out and pull the module away from the door.
8
Remove the dispenser lever screws and retaining brackets, then lift out the old lever.
9
Install the new dispenser lever by inserting it into the control module, making sure the spring is correctly positioned in the notch on the lever.
10
Replace the retaining brackets and screws.
11
Reposition the dispenser control module, making sure the water supply tube is in place.
12
Reinstall the screws, reconnect the wire harness, and slide the dispenser cover down into position.
13
Secure it with the screws.
14
Snap the drip tray into place.
15
You're now ready to plug the appliance back in to make sure it's functioning properly.
Description
This video provides step-by-step repair instructions for replacing the dispenser lever (or water dispenser actuator) on a Frigidaire refrigerator. The most common reason for replacing the dispenser lever is when it is damaged or broken.
All of the information for this dispenser lever replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Crosley, Gibson
Tools needed: screwdriver
All of the information for this dispenser lever replacement video is applicable to the following brands:
Frigidaire, Westinghouse, Crosley, Gibson
Tools needed: screwdriver
Step-By-Step Instructions
1
In this video, we will show one or more of these icons to alert you when to use caution, as with any repair.
2
Be sure you unplug the appliance before beginning.
3
Your first step is to pull off the drip tray and remove the dispenser cover screws.
4
Next, lift the cover up and off.
5
Then, disconnect the wire harness.
6
Remove the screws securing the dispenser control module.
7
Pull the water supply tube out and pull the module away from the door.
8
Remove the dispenser lever screws and retaining brackets, then lift out the old lever.
9
Install the new dispenser lever by inserting it into the control module, making sure the spring is correctly positioned in the notch on the lever.
10
Replace the retaining brackets and screws.
11
Reposition the dispenser control module, making sure the water supply tube is in place.
12
Reinstall the screws, reconnect the wire harness, and slide the dispenser cover down into position.
13
Secure it with the screws.
14
Snap the drip tray into place.
15
You're now ready to plug the appliance back in to make sure it's functioning properly.
Applicable Product Model
Parts Needed
Dispenser Lever
$46.56
Total$0.00
Related Articles & Videos