In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Microwave Oven Control Panel Replacement 5304509420 
Frigidaire Microwave Oven Control Panel Replacement 5304509420
Skill Level
Total Parts Cost
$166.15Estimated Savings
$112.5003:52
- Description
This video provides step-by-step repair instructions for replacing the control panel on a Frigidaire microwave oven (Model FFMV1645TSA). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Frigidaire
All of the information for this video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Microwave Oven - Model FFMV1645TSA
2
Microwave Oven Control Panel Replacement
3
Tools Needed
4
You will need a phillips-head screwdriver, a putty knife, a flat-head screwdriver and a magnetized screwdriver for this procedure.
5
Shock
6
Be sure to unplug the power cord or shut off the power supply.
7
Open the door and use a phillips-head screwdriver to unthread the two screws securing the front vent.
8
You can use a putty knife to help pry the vent off.
9
Unthread the screw securing the control assembly.
10
Lift the control assembly up to detach.
11
Note the orientation of the wires connected to the control board, then disconnect them.
12
Remove the assembly, then unthread the four screws securing the control board.
13
Disconnect the ribbon connecter and lift out the board.
14
Use a flat-head screwdriver to detach the control board mounting plate from the old control panel.
15
Prepare the new control panel for installation by first feeding the ribbon connecter through the slot in the control board mounting plate as you snap the plate into place.
16
Position the control board and thread the screws to secure.
17
Connect the new ribbon connecter to the board.
18
Insert the control assembly tabs into the slots in the microwave oven frame and reconnect all of the control board wire connecters to the appropriate terminals.
19
Align the control assembly and push down.
20
Thread the screw ? having a magnetized screwdriver will make this easier.
21
Reinstall the front vent by aligning the top edge first then press the bottom edge into place.
22
Thread the screws to secure.
23
Plug the power cord back in or restore the power supply.
24
Congrats! Your microwave oven is ready for use.
Description
This video provides step-by-step repair instructions for replacing the control panel on a Frigidaire microwave oven (Model FFMV1645TSA). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Frigidaire
All of the information for this video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Microwave Oven - Model FFMV1645TSA
2
Microwave Oven Control Panel Replacement
3
Tools Needed
4
You will need a phillips-head screwdriver, a putty knife, a flat-head screwdriver and a magnetized screwdriver for this procedure.
5
Shock
6
Be sure to unplug the power cord or shut off the power supply.
7
Open the door and use a phillips-head screwdriver to unthread the two screws securing the front vent.
8
You can use a putty knife to help pry the vent off.
9
Unthread the screw securing the control assembly.
10
Lift the control assembly up to detach.
11
Note the orientation of the wires connected to the control board, then disconnect them.
12
Remove the assembly, then unthread the four screws securing the control board.
13
Disconnect the ribbon connecter and lift out the board.
14
Use a flat-head screwdriver to detach the control board mounting plate from the old control panel.
15
Prepare the new control panel for installation by first feeding the ribbon connecter through the slot in the control board mounting plate as you snap the plate into place.
16
Position the control board and thread the screws to secure.
17
Connect the new ribbon connecter to the board.
18
Insert the control assembly tabs into the slots in the microwave oven frame and reconnect all of the control board wire connecters to the appropriate terminals.
19
Align the control assembly and push down.
20
Thread the screw ? having a magnetized screwdriver will make this easier.
21
Reinstall the front vent by aligning the top edge first then press the bottom edge into place.
22
Thread the screws to secure.
23
Plug the power cord back in or restore the power supply.
24
Congrats! Your microwave oven is ready for use.
Applicable Product Model
Parts Needed
Touchpad and Control Panel
$166.15
Total$0.00
Related Articles & Videos
04:16
Part Replacement
Frigidaire Microwave Oven Center Door Switch Replacement 5304509459