In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAriens Snowblower Drive Belt Kit Replacement #07200514
Ariens Snowblower Drive Belt Kit Replacement #07200514
Total Parts Cost
$NaN03:10
- Description
This video provides step-by-step repair instructions for replacing the drive belt (or v-belt) on an Ariens snowblower. The most common reasons for replacing the drive belt are when the drive belt is worn-out or damaged or when the auger won’t turn.
All of the information for this drive belt replacement video is applicable to the following brands:
Ariens
Tools needed: socket wrench, snap ring pliers
All of the information for this drive belt replacement video is applicable to the following brands:
Ariens
Tools needed: socket wrench, snap ring pliers
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the engine.
2
To replace the auger drive belts, your first step is to detach the deflector cable from the chute.
3
Next, remove the screws securing the belt cover and pull the cover off.
4
Now use a ½ inch socket to remove the bolts and washers securing the belt guide and pull the guide off.
5
Remove the bolts and washers securing the blower housing to the frame.
6
Pivot the frame away from the blower housing detach and rest the rear portion of the snowblower on its handlebars.
7
Remove the old auger drive belts if still intact.
8
Install the new auger driver belts by aligning them on the pulley.
9
Rejoin the two halves of the snowblower together making sure the chute crank rod inserts into the hole in the control panel.
10
Route the new auger drive belts onto the drive shaft and secure the blower housing to the frame with the bolts and washers.
11
Reinstall the belt guide and secure it with the bolts and washers.
12
Replace the belt cover and secure the screws.
13
Route the deflector cable into the guide and reconnect the “t” connection.
14
With the new belts installed you can now return the start key to the snowblower’s engine.
Description
This video provides step-by-step repair instructions for replacing the drive belt (or v-belt) on an Ariens snowblower. The most common reasons for replacing the drive belt are when the drive belt is worn-out or damaged or when the auger won’t turn.
All of the information for this drive belt replacement video is applicable to the following brands:
Ariens
Tools needed: socket wrench, snap ring pliers
All of the information for this drive belt replacement video is applicable to the following brands:
Ariens
Tools needed: socket wrench, snap ring pliers
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the engine.
2
To replace the auger drive belts, your first step is to detach the deflector cable from the chute.
3
Next, remove the screws securing the belt cover and pull the cover off.
4
Now use a ½ inch socket to remove the bolts and washers securing the belt guide and pull the guide off.
5
Remove the bolts and washers securing the blower housing to the frame.
6
Pivot the frame away from the blower housing detach and rest the rear portion of the snowblower on its handlebars.
7
Remove the old auger drive belts if still intact.
8
Install the new auger driver belts by aligning them on the pulley.
9
Rejoin the two halves of the snowblower together making sure the chute crank rod inserts into the hole in the control panel.
10
Route the new auger drive belts onto the drive shaft and secure the blower housing to the frame with the bolts and washers.
11
Reinstall the belt guide and secure it with the bolts and washers.
12
Replace the belt cover and secure the screws.
13
Route the deflector cable into the guide and reconnect the “t” connection.
14
With the new belts installed you can now return the start key to the snowblower’s engine.
Applicable Product Model
Related Articles & Videos