In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Matrix Refrigerator Ice Maker Replacement 4317943 
Whirlpool Matrix Refrigerator Ice Maker Replacement 4317943
Total Parts Cost
$NaN02:11
- Description
This video provides step-by-step repair instructions for replacing the ice maker on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is not making ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Ice Maker Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
Open the freezer door and remove the ice bucket.
7
Using a quarter-inch socket or nut driver, fully unthread the lower screw securing the ice maker to the liner.
8
Loosen the two upper screws.
9
With the screws loosened, you can lift the ice maker off of the screws.
10
Lift the tab to disconnect the wire harness to fully remove the old ice maker.
11
Prepare the new ice maker for installation by transferring the ice level arm from the old unit to the new one.
12
Returning to the freezer compartment, connect the wire harness.
13
Align the ice maker on the fill tube as you hook the brackets on the upper screws.
14
Tighten the screws.
15
Thread and tighten the lower screw.
16
Replace the ice bucket.
17
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ice maker on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is not making ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Ice Maker Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
Open the freezer door and remove the ice bucket.
7
Using a quarter-inch socket or nut driver, fully unthread the lower screw securing the ice maker to the liner.
8
Loosen the two upper screws.
9
With the screws loosened, you can lift the ice maker off of the screws.
10
Lift the tab to disconnect the wire harness to fully remove the old ice maker.
11
Prepare the new ice maker for installation by transferring the ice level arm from the old unit to the new one.
12
Returning to the freezer compartment, connect the wire harness.
13
Align the ice maker on the fill tube as you hook the brackets on the upper screws.
14
Tighten the screws.
15
Thread and tighten the lower screw.
16
Replace the ice bucket.
17
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Related Articles & Videos
03:42
Part Replacement
Whirlpool Matrix Refrigerator Water Supply Line Kit Installation 8003RP
01:09
Part Replacement
Whirlpool Matrix Refrigerator Front Leveling Leg Replacement W10854419
07:18
Part Replacement
Whirlpool Matrix Refrigerator Defrost Heater Replacement WPW10316428
05:05
Part Replacement
Whirlpool Matrix Refrigerator Freezer Thermistor Replacement WPW10384183