In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Choke Lever Handle Replacement #117-7727
Toro Snowblower Choke Lever Handle Replacement #117-7727
Total Parts Cost
$NaN00:45
- Description
This video provides step-by-step repair instructions for replacing the choke lever handle on a Toro snowblower. The most common reason for replacing the choke lever handle is when it is lost or damaged.
All of the information for this choke lever handle replacement video is applicable to the following brands:
Toro
Tools needed: snap ring pliers
All of the information for this choke lever handle replacement video is applicable to the following brands:
Toro
Tools needed: snap ring pliers
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the choke lever handle, your first step is to place the choke lever in the full choke position.
3
Next, use needle-nose pliers to widen the handle tabs so you can pull off the old handle if still intact.
4
Install the new choke lever handle by snapping it onto the choke lever.
5
With the new handle in place you can now return the start key to the ignition.
Description
This video provides step-by-step repair instructions for replacing the choke lever handle on a Toro snowblower. The most common reason for replacing the choke lever handle is when it is lost or damaged.
All of the information for this choke lever handle replacement video is applicable to the following brands:
Toro
Tools needed: snap ring pliers
All of the information for this choke lever handle replacement video is applicable to the following brands:
Toro
Tools needed: snap ring pliers
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the choke lever handle, your first step is to place the choke lever in the full choke position.
3
Next, use needle-nose pliers to widen the handle tabs so you can pull off the old handle if still intact.
4
Install the new choke lever handle by snapping it onto the choke lever.
5
With the new handle in place you can now return the start key to the ignition.
Applicable Product Model
Related Articles & Videos