In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Won't Throw Snow? Repair Help #117-7700
Toro Snowblower Won't Throw Snow? Repair Help #117-7700
Total Parts Cost
$NaN01:13
- Description
This video provides step-by-step instructions for replacing a rubber auger blade (or paddle) on Toro snowblowers. The most common reason for replacing an auger blade is if the snowblower is not throwing snow like it should and the blade looks worn out.
All of the information in this auger bearing replacement video is applicable to the following brands: Toro
Tools used: screwdriver, open-end wrench
All of the information in this auger bearing replacement video is applicable to the following brands: Toro
Tools used: screwdriver, open-end wrench
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the auger paddle, your first step is to remove the screws and lock nuts securing the old paddle to the auger assembly.
3
Pull the old paddle off and discard it.
4
Install the new auger paddle by flexing it onto the auger assembly.
5
Insert the screws and lock nuts.
6
After confirming the paddle is properly aligned tighten all of the fasteners.
7
With new auger paddle installed you can now return the start key to the ignition.
Description
This video provides step-by-step instructions for replacing a rubber auger blade (or paddle) on Toro snowblowers. The most common reason for replacing an auger blade is if the snowblower is not throwing snow like it should and the blade looks worn out.
All of the information in this auger bearing replacement video is applicable to the following brands: Toro
Tools used: screwdriver, open-end wrench
All of the information in this auger bearing replacement video is applicable to the following brands: Toro
Tools used: screwdriver, open-end wrench
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the auger paddle, your first step is to remove the screws and lock nuts securing the old paddle to the auger assembly.
3
Pull the old paddle off and discard it.
4
Install the new auger paddle by flexing it onto the auger assembly.
5
Insert the screws and lock nuts.
6
After confirming the paddle is properly aligned tighten all of the fasteners.
7
With new auger paddle installed you can now return the start key to the ignition.
Applicable Product Model
Related Articles & Videos