In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Drive Belt Replacement #117-7733
Toro Snowblower Drive Belt Replacement #117-7733
Total Parts Cost
$NaN01:25
- Description
This video provides step-by-step repair instructions for replacing the drive belt on a Toro snowblower. The most common reason for replacing the drive belt is when the snowblower auger won’t turn.
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
Tools needed: nutdriver, socket wrench
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
Tools needed: nutdriver, socket wrench
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the drive belt, your first step is to remove the mounting screws securing the belt cover and pull the cover off.
3
Next, push the idler arm down to free the old belt from the brake and auger pulley if still intact.
4
Release the belt from the engine pulley and discard the old belt.
5
Install the new drive belt by looping it onto the engine pulley and under the idler pulley.
6
Push the idler arm down and loop the remainder of the belt under the brake and around the auger pulley.
7
Confirm that the new belt is seated properly.
8
Replace the belt cover and secure the screws.
9
With the new drive belt installed you can now return the start key to the ignition.
Description
This video provides step-by-step repair instructions for replacing the drive belt on a Toro snowblower. The most common reason for replacing the drive belt is when the snowblower auger won’t turn.
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
Tools needed: nutdriver, socket wrench
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
Tools needed: nutdriver, socket wrench
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the drive belt, your first step is to remove the mounting screws securing the belt cover and pull the cover off.
3
Next, push the idler arm down to free the old belt from the brake and auger pulley if still intact.
4
Release the belt from the engine pulley and discard the old belt.
5
Install the new drive belt by looping it onto the engine pulley and under the idler pulley.
6
Push the idler arm down and loop the remainder of the belt under the brake and around the auger pulley.
7
Confirm that the new belt is seated properly.
8
Replace the belt cover and secure the screws.
9
With the new drive belt installed you can now return the start key to the ignition.
Applicable Product Model
Related Articles & Videos