DescriptionThis video provides step-by-step repair instructions for replacing the inner door glass on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the glass is if it is damaged or dirty.
All of the information for this glass replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step-By-Step Instructions1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Inner Door Glass Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or nut driver
4
Fully open the appropriate door and rotate both door hinge locks back.
6
Partially close the door, then lift and pull the door toward you to remove.
7
With the handle side down, set the door on a sturdy surface.
8
Using a Phillips-head screwdriver, unthread the four screws securing the inner door frame to the outer door assembly.
10
With the screws removed, lift off the frame
11
Use a quarter-inch socket or nut driver to unthread the screws securing the glass retaining bracket.
13
Carefully remove the old glass.
14
Install the new inner door glass by aligning it in the door frame, then position the retaining bracket and secure it with the screws.
15
Now reposition the frame on the outer door assembly.
16
Thread and tighten the four screws to secure ? the short screws secure the bottom of the frame.
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
Lower the door to its fully open position, then rotate the hinge locks forward.