In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Lawn Mower Blade Driver Replacement #106-3987
Toro Lawn Mower Blade Driver Replacement #106-3987
Total Parts Cost
$NaN02:27
- Description
This video provides step-by-step instructions for replacing the blade driver on Toro lawn mowers. The most common reason for replacing the blade driver is when the lawn mower wheels don’t turn.
All the information in this blade driver replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: socket wrench
All the information in this blade driver replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: socket wrench
Step By Step Instructions
1
Before you begin the repair, make sure the mower’s engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to carefully set the mower on its side.
3
Next, use a support to hold the blade in place.
4
Using a 5/8th inch socket, remove the mounting bolt and washer then pull off the blade adapter and blade.
5
Now use a half-inch socket to remove the upper bolt securing the belt guide and loosen the lower bolt.
6
Move the guide out of the way and unthread the belt.
7
Pull off the old blade driver and remove the spacer seated inside. You’re now ready to install the new blade driver.
8
Properly align the spacer and insert it into the new driver.
9
Align the key on the driver with the keyway in the shaft, slide the new driver into place and thread the belt.
10
Reposition the belt guide.
11
Reinstall the upper bolt and tighten the lower one.
12
Next, insert the bolt and washer through the adapter and blade.
13
Position the assembly onto the blade driver and use the support to hold the blade in place.
14
Thread the bolt and torque the bolt to 60 foot pounds. Be aware this may require some effort.
15
Remove the support and carefully set the mower upright.
16
With the repair complete, you can now reattach the spark plug wire and boot.
Description
This video provides step-by-step instructions for replacing the blade driver on Toro lawn mowers. The most common reason for replacing the blade driver is when the lawn mower wheels don’t turn.
All the information in this blade driver replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: socket wrench
All the information in this blade driver replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: socket wrench
Step-By-Step Instructions
1
Before you begin the repair, make sure the mower’s engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to carefully set the mower on its side.
3
Next, use a support to hold the blade in place.
4
Using a 5/8th inch socket, remove the mounting bolt and washer then pull off the blade adapter and blade.
5
Now use a half-inch socket to remove the upper bolt securing the belt guide and loosen the lower bolt.
6
Move the guide out of the way and unthread the belt.
7
Pull off the old blade driver and remove the spacer seated inside. You’re now ready to install the new blade driver.
8
Properly align the spacer and insert it into the new driver.
9
Align the key on the driver with the keyway in the shaft, slide the new driver into place and thread the belt.
10
Reposition the belt guide.
11
Reinstall the upper bolt and tighten the lower one.
12
Next, insert the bolt and washer through the adapter and blade.
13
Position the assembly onto the blade driver and use the support to hold the blade in place.
14
Thread the bolt and torque the bolt to 60 foot pounds. Be aware this may require some effort.
15
Remove the support and carefully set the mower upright.
16
With the repair complete, you can now reattach the spark plug wire and boot.
Applicable Product Model
Related Articles & Videos