Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator User Control & Display Board #242048229
Frigidaire Refrigerator User Control & Display Board #242048229
Skill Level
Total Parts Cost
$186.70Estimated Savings
$112.5001:30
- Description
This video provides step-by-step repair instructions for replacing the user control & display board on a Frigidaire refrigerator. The most common reason for replacing the board is if the refrigerator will not work at all.
All of the information for this refrigerator board replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: thin putty knife
All of the information for this refrigerator board replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: thin putty knife
Step By Step Instructions
1
Be sure to unplug the power cord.
2
Open the refrigerator door and use a thin putty knife to carefully pry out the old user control board.
3
Disconnect the wire connecter to fully remove the old component.
4
Before you install the new user control and display board peel off the protective covering.
5
Now connect the wire connecter then align the component on the side of the door and snap it into place. With the repair completed
6
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the user control & display board on a Frigidaire refrigerator. The most common reason for replacing the board is if the refrigerator will not work at all.
All of the information for this refrigerator board replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: thin putty knife
All of the information for this refrigerator board replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: thin putty knife
Step-By-Step Instructions
1
Be sure to unplug the power cord.
2
Open the refrigerator door and use a thin putty knife to carefully pry out the old user control board.
3
Disconnect the wire connecter to fully remove the old component.
4
Before you install the new user control and display board peel off the protective covering.
5
Now connect the wire connecter then align the component on the side of the door and snap it into place. With the repair completed
6
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos