Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator User Interface Replacement #242058230
Frigidaire Refrigerator User Interface Replacement #242058230
Skill Level
Total Parts Cost
$201.49Estimated Savings
$112.5002:14
- Description
This video provides step-by-step repair instructions for replacing the user interface on a Frigidaire refrigerator. The most common reason for replacing the interface is if the screen or buttons will not work.
All of the information for this refrigerator user interface replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
All of the information for this refrigerator user interface replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
Step By Step Instructions
1
Before you replace the user interface on your refrigerator be sure to unplug the power cord.
2
Use a phillips-head screwdriver or a number two square drive bit to unthread the two screws securing the lower trim.
3
Next, remove the screws securing the bottom of the user interface.
4
You can now pull the interface out from the bottom to detach.
5
Note the orientation of the wires connected to the interface then disconnect them.
6
Install the new user interface by first connecting the wires to the appropriate terminals.
7
Insert the mounting tabs into the slots in the upper housing and push the interface into place.
8
Thread and tighten the screws to secure.
9
Realign the lower trim and secure it with the screws.
10
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the user interface on a Frigidaire refrigerator. The most common reason for replacing the interface is if the screen or buttons will not work.
All of the information for this refrigerator user interface replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
All of the information for this refrigerator user interface replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the user interface on your refrigerator be sure to unplug the power cord.
2
Use a phillips-head screwdriver or a number two square drive bit to unthread the two screws securing the lower trim.
3
Next, remove the screws securing the bottom of the user interface.
4
You can now pull the interface out from the bottom to detach.
5
Note the orientation of the wires connected to the interface then disconnect them.
6
Install the new user interface by first connecting the wires to the appropriate terminals.
7
Insert the mounting tabs into the slots in the upper housing and push the interface into place.
8
Thread and tighten the screws to secure.
9
Realign the lower trim and secure it with the screws.
10
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Dispenser Control Board
$201.49
Total$0.00
Related Articles & Videos