In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Condenser Fan Blade Replacement #241639501
Frigidaire Refrigerator Condenser Fan Blade Replacement #241639501
Skill Level
Total Parts Cost
$15.50Estimated Savings
$112.5002:37
- Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Frigidaire refrigerator. The most common reason for replacing the fan blade is if it is noisy.
All of the information for this refrigerator fan blade replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket
All of the information for this refrigerator fan blade replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket
Step By Step Instructions
1
Before you replace the condenser fan blade in your refrigerator be sure to unplug the power cord
2
Shut off the water supply.
3
Use a quarter-inch socket or nut driver to unthread the screw securing the water supply line retainer to the rear panel.
4
Detach the water supply line from the inlet valve.
5
Next, unthread the remaining screws securing the rear access panel.
6
Set the panel aside.
7
Note the orientation of the condenser fan motor blade then push it off of the motor shaft.
8
Install the new condenser fan blade by aligning it on the motor shaft and pushing it into position.
9
Reposition the rear access panel and secure it with the screws.
10
Reattach the water supply line to the inlet valve.
11
Secure the line to the rear panel with the retainer.
12
With the repair completed turn the water supply back on
13
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Frigidaire refrigerator. The most common reason for replacing the fan blade is if it is noisy.
All of the information for this refrigerator fan blade replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket
All of the information for this refrigerator fan blade replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 1/4" socket
Step-By-Step Instructions
1
Before you replace the condenser fan blade in your refrigerator be sure to unplug the power cord
2
Shut off the water supply.
3
Use a quarter-inch socket or nut driver to unthread the screw securing the water supply line retainer to the rear panel.
4
Detach the water supply line from the inlet valve.
5
Next, unthread the remaining screws securing the rear access panel.
6
Set the panel aside.
7
Note the orientation of the condenser fan motor blade then push it off of the motor shaft.
8
Install the new condenser fan blade by aligning it on the motor shaft and pushing it into position.
9
Reposition the rear access panel and secure it with the screws.
10
Reattach the water supply line to the inlet valve.
11
Secure the line to the rear panel with the retainer.
12
With the repair completed turn the water supply back on
13
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Condenser Fan Blade
$15.50
Total$0.00
Related Articles & Videos
02:29
Part Replacement
Condenser Fan Blade (part 241639502) - Frigidaire Refrigerator Repair