In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Washer Leveling Leg Replacement #W10001130
Whirlpool/Kenmore Washer Leveling Leg Replacement #W10001130
Total Parts Cost
$NaN01:25
- Description
This video provides step-by-step repair instructions for replacing the adjustable leveling leg on a Whirlpool/Kenmore top-loading washing machine. The most common reason for replacing the leveling leg is when the washer is vibrating.
All of the information for this leveling leg replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Jenn Air
Tools needed: open-ended wrench
All of the information for this leveling leg replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Jenn Air
Tools needed: open-ended wrench
Step By Step Instructions
1
Carefully tilt the washer back and use a wood block, or a comparable sturdy object, to support the washer.
2
Use a wrench to loosen the leg nut then unscrew the old leg.
3
Remove the leg nut and transfer it to the new leg.
4
Position the leg nut as close to the rubber foot as possible.
5
Next, screw the leg into the base of the washer until the leg nut is flush against it.
6
Remove the support and gently lower the front of the washer to the floor.
7
Determine if your washer is level.
8
If it isn’t tilt the washer back adjust the leg accordingly, and tighten the leg nut to lock it into place.
9
Once you’ve completed adjusting the leg tip the washer forward and carefully set it back down.
10
This will set the self-adjusting rear legs into their proper positions.
11
Confirm that your washer is level and ready for use.
Description
This video provides step-by-step repair instructions for replacing the adjustable leveling leg on a Whirlpool/Kenmore top-loading washing machine. The most common reason for replacing the leveling leg is when the washer is vibrating.
All of the information for this leveling leg replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Jenn Air
Tools needed: open-ended wrench
All of the information for this leveling leg replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Jenn Air
Tools needed: open-ended wrench
Step-By-Step Instructions
1
Carefully tilt the washer back and use a wood block, or a comparable sturdy object, to support the washer.
2
Use a wrench to loosen the leg nut then unscrew the old leg.
3
Remove the leg nut and transfer it to the new leg.
4
Position the leg nut as close to the rubber foot as possible.
5
Next, screw the leg into the base of the washer until the leg nut is flush against it.
6
Remove the support and gently lower the front of the washer to the floor.
7
Determine if your washer is level.
8
If it isn’t tilt the washer back adjust the leg accordingly, and tighten the leg nut to lock it into place.
9
Once you’ve completed adjusting the leg tip the washer forward and carefully set it back down.
10
This will set the self-adjusting rear legs into their proper positions.
11
Confirm that your washer is level and ready for use.
Applicable Product Model
Related Articles & Videos
04:10
Part Replacement
Washer Won't Spin? Replace Whirlpool Direct Drive Clutch Assembly Part # 285785