Husqvarna String Trimmer Primer Bulb Replacement #0057025

Print ContentSave Content

Skill Level

Total Parts Cost

$2.62

Estimated Savings

$112.50

02:26

Description

This video provides step-by-step instructions for replacing the primer bulb on a Husqvarna string trimmer. The most common reason for replacing the bulb is if the engine won't start.

All of the information in this primer bulb replacement video is applicable to the following brands: Poulan, Husqvarna, Craftsman, Poulan Pro

Tools used: 8mm socket, phillips head screwdriver

Step By Step Instructions

Print Instructions

Anncr: repairclinic makes fixing things easy…

…with millions of replacement parts available on our website…

…and the help you need to do the repair yourself.

Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.

Before you replace the primer bulb on your string trimmer…

…make sure the engine has cooled.

Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.

Loosen the knob to release the air filter cover.

Remove the filter…

…and use an 8mm socket or nut driver to unthread the air filter housing mounting nuts.

Lift up the choke lever and remove the housing.

Using a phillips-head screwdriver, unthread the screws securing the primer bulb mounting plate.

Pull off the plate and remove the old bulb.

Install the new primer bulb…

…by inserting it into the plate.

Align the plate on the fuel pump…reposition the pump on the carburetor…

…then rethread the screws to secure.

Realign the air filter housing…

…and secure it with the nuts.

Open the choke and replace the air filter.

Reposition the air filter cover and tighten the knob to secure.

With the repair completed, reattach the wire and boot to the spark plug…

…and your string trimmer should be ready for use.

At repairclinic – we make fixing things easy.

Thank you for supporting the production of these videos by purchasing your parts from our website.