In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Washer Heating Element Replacement #137488301
Electrolux Washer Heating Element Replacement #137488301
Skill Level
Total Parts Cost
$63.99Estimated Savings
$112.5002:46
- Description
This video provides step-by-step repair instructions for replacing the heating element on an Electrolux washing machine. The most common reason for replacing the element is the water not getting hot enough during the wash cycle.
All of the information for this heating element replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 10mm deep well socket
All of the information for this heating element replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 10mm deep well socket
Step By Step Instructions
1
Before you replace the heating element in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel
3
Set the panel aside
4
Note the orientation of the wires connected to the heating element then disconnect them.
5
Use a 10mm deep-well socket to unthread the mounting nut securing the heating element.
6
Use a flat-head screwdriver to help pry out the old element.
7
Install the new heating element by inserting it firmly into the tub.
8
Tighten the mounting nut.
9
Connect the wires to the appropriate terminals.
10
Reposition the rear access panel.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the heating element on an Electrolux washing machine. The most common reason for replacing the element is the water not getting hot enough during the wash cycle.
All of the information for this heating element replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 10mm deep well socket
All of the information for this heating element replacement video is applicable to the following brands:
Electrolux
Tools needed: phillips head screwdriver, #2 square bit, 10mm deep well socket
Step-By-Step Instructions
1
Before you replace the heating element in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel
3
Set the panel aside
4
Note the orientation of the wires connected to the heating element then disconnect them.
5
Use a 10mm deep-well socket to unthread the mounting nut securing the heating element.
6
Use a flat-head screwdriver to help pry out the old element.
7
Install the new heating element by inserting it firmly into the tub.
8
Tighten the mounting nut.
9
Connect the wires to the appropriate terminals.
10
Reposition the rear access panel.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
02:54
Part Replacement
Electrolux Front-Load Washer Heating Element Replacement (part 137488301)