In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Microwave Turntable Motor Coupler Replacement #WB06X10815
GE Microwave Turntable Motor Coupler Replacement #WB06X10815
Skill Level
Total Parts Cost
$56.49Estimated Savings
$112.5002:26
- Description
This video provides step-by-step instructions for replacing the turntable motor coupler on GE microwaves. The most common reason for replacing the turntable motor coupler is when the turntable will not turn but the motor is running.
All of the information in this turntable motor coupler replacement video is applicable to the following brands: GE
Tools used: Phillips head screwdriver
All of the information in this turntable motor coupler replacement video is applicable to the following brands: GE
Tools used: Phillips head screwdriver
Step By Step Instructions
1
Before you replace the turntable motor coupler in your microwave oven unplug the power cord.
2
Now release the bottom panel by using a phillips-head screwdriver to unthread the mounting screws.
3
Disconnect the turntable motor wires.
4
Next, use a short phillips-head screwdriver to unthread the motor mounting screw.
5
Rotate the motor counter-clockwise and pull down to remove.
6
Remove the glass turntable and lift out the old motor coupler if still intact.
7
Install the new turntable motor coupler by inserting it into the base.
8
Holding the coupler down, reinsert the motor shaft through the base and rotate it until it locks into place.
9
Replace the mounting screw to secure the motor.
10
Reconnect the motor wires.
11
Lift up the bottom panel and secure it with the screws.
12
Replace the glass turntable.
13
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Description
This video provides step-by-step instructions for replacing the turntable motor coupler on GE microwaves. The most common reason for replacing the turntable motor coupler is when the turntable will not turn but the motor is running.
All of the information in this turntable motor coupler replacement video is applicable to the following brands: GE
Tools used: Phillips head screwdriver
All of the information in this turntable motor coupler replacement video is applicable to the following brands: GE
Tools used: Phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the turntable motor coupler in your microwave oven unplug the power cord.
2
Now release the bottom panel by using a phillips-head screwdriver to unthread the mounting screws.
3
Disconnect the turntable motor wires.
4
Next, use a short phillips-head screwdriver to unthread the motor mounting screw.
5
Rotate the motor counter-clockwise and pull down to remove.
6
Remove the glass turntable and lift out the old motor coupler if still intact.
7
Install the new turntable motor coupler by inserting it into the base.
8
Holding the coupler down, reinsert the motor shaft through the base and rotate it until it locks into place.
9
Replace the mounting screw to secure the motor.
10
Reconnect the motor wires.
11
Lift up the bottom panel and secure it with the screws.
12
Replace the glass turntable.
13
With the repair completed, plug the power cord back in and your microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos