In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Electric Range/Oven Sensor Replacement #316490000
Frigidaire Electric Range/Oven Sensor Replacement #316490000
Skill Level
Total Parts Cost
$47.02Estimated Savings
$112.5001:14
- Description
This video provides step-by-step repair instructions for replacing the oven sensor on a Frigidaire electric range. The most common reason for replacing the sensor is when the oven doesn’t bake evenly.
All of the information for this oven sensor replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Tappan, Kelvinator, Westinghouse, Gibson
Tools needed: 14” nut driver
All of the information for this oven sensor replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Tappan, Kelvinator, Westinghouse, Gibson
Tools needed: 14” nut driver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven’s back panel.
3
Next, remove the mounting screw and pull the old sensor from the oven.
4
Disconnect the wire.
5
Install the new oven sensor by reconnecting the wire then insert the sensor into the oven cavity and secure it with the mounting screw.
6
Replace the back panel and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the oven sensor on a Frigidaire electric range. The most common reason for replacing the sensor is when the oven doesn’t bake evenly.
All of the information for this oven sensor replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Tappan, Kelvinator, Westinghouse, Gibson
Tools needed: 14” nut driver
All of the information for this oven sensor replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Tappan, Kelvinator, Westinghouse, Gibson
Tools needed: 14” nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven’s back panel.
3
Next, remove the mounting screw and pull the old sensor from the oven.
4
Disconnect the wire.
5
Install the new oven sensor by reconnecting the wire then insert the sensor into the oven cavity and secure it with the mounting screw.
6
Replace the back panel and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Temperature Sensor
$47.02
Total$0.00
Related Articles & Videos