In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Front-Load Washer Power Cord Replacement #134501000
Frigidaire Front-Load Washer Power Cord Replacement #134501000
Skill Level
Total Parts Cost
$62.21Estimated Savings
$112.5001:55
- Description
This video provides step-by-step instructions for replacing the power cord on Frigidaire front-load washing machines. The most common reason for replacing the power cord is if the washer won’t start and the power cord proves to be defective; this is rare.
All of the information in this drive motor replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Ward
Tools used: multi-screwdriver, Phillips head bit, 5/16” socket, pliers, nut driver
All of the information in this drive motor replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Ward
Tools used: multi-screwdriver, Phillips head bit, 5/16” socket, pliers, nut driver
Step By Step Instructions
1
To replace the power cord on your washer…
2
…first unplug the old cord from the wall outlet.
3
Next, remove the screws securing the top panel.
4
Now lift the panel up and push forward to remove.
5
Disconnect the power cord wire harness.
6
Now use pliers to depress the tabs on the cord retainer and remove the old cord from the frame.
7
Prepare the new power cord for installation.
8
…by transferring the retainer from the old cord to the new one.
9
Insert the power cord wire harness through the frame...use pliers to squeeze the retainer…and snap the retainer into the frame.
10
Connect the wire harness.
11
Realign the top panel…
12
…and replace the screws to secure.
13
You’re now ready to plug the new power cord in…
14
…and confirm that the washer works properly.
Description
This video provides step-by-step instructions for replacing the power cord on Frigidaire front-load washing machines. The most common reason for replacing the power cord is if the washer won’t start and the power cord proves to be defective; this is rare.
All of the information in this drive motor replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Ward
Tools used: multi-screwdriver, Phillips head bit, 5/16” socket, pliers, nut driver
All of the information in this drive motor replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Universal, Kenmore, Kelvinator, Tappan, Electrolux, Crosley, Montgomery Ward
Tools used: multi-screwdriver, Phillips head bit, 5/16” socket, pliers, nut driver
Step-By-Step Instructions
1
To replace the power cord on your washer…
2
…first unplug the old cord from the wall outlet.
3
Next, remove the screws securing the top panel.
4
Now lift the panel up and push forward to remove.
5
Disconnect the power cord wire harness.
6
Now use pliers to depress the tabs on the cord retainer and remove the old cord from the frame.
7
Prepare the new power cord for installation.
8
…by transferring the retainer from the old cord to the new one.
9
Insert the power cord wire harness through the frame...use pliers to squeeze the retainer…and snap the retainer into the frame.
10
Connect the wire harness.
11
Realign the top panel…
12
…and replace the screws to secure.
13
You’re now ready to plug the new power cord in…
14
…and confirm that the washer works properly.
Applicable Product Model
Parts Needed
Power Cord
$62.21
Total$0.00
Related Articles & Videos