Order by 2:00 a.m., and we'll ship the same day
316075103 Bake Element
This part 316075103 is compatible with:
- Product Type:
- Range/Stove/Oven, Oven/Microwave Combo
- Brands:
- Frigidaire, Kenmore, White-Westinghouse, Tappan, Crosley, Kelvinator, Gibson, Ikea, Universal
How to Replace Bake Element 316075103
Step 1 of 10Disconnect Power to the Oven
For your safety, always unplug the appliance from the wall outlet before beginning any repair work. This will prevent the risk of electric shock.
Remove the Oven Racks
Open the oven door and remove all of the oven racks. This will give you clear access to the bake element at the bottom of the oven cavity.
Unscrew the Old Bake Element
Using a quarter-inch nut driver or a Phillips screwdriver, remove the two mounting screws that secure the bake element to the back wall of the oven.
Disconnect and Remove the Old Element
Gently pull the old bake element forward a few inches to expose the wire connections. Carefully disconnect the two wires from the element's terminals. Be careful not to let the wires retract back into the holes in the oven wall. Once disconnected, you can fully remove the old element.
Optional: Remove the Rear Access Panel
If one of the wires slips back into the opening in the oven wall, you will need to access it from the back. Unscrew and remove the lower rear access panel to retrieve the wire. Be cautious as the panel edges can be sharp.
Connect the New Bake Element
Take the new bake element and connect the two wires to its terminals. Ensure the connections are firm and secure.
Install and Secure the New Element
Carefully slide the new element into the oven, pushing the terminals and excess wire back through the holes. Align the mounting brackets with the screw holes and reinstall the two mounting screws to secure it in place.
Optional: Reinstall the Rear Panel
If you removed the rear access panel, position it back onto the oven and reinstall all the screws to secure it.
Reinstall the Oven Racks
Place the oven racks back inside the oven cavity.
Restore Power and Test
Plug the oven's power cord back into the wall outlet. To ensure the repair was successful, turn on the oven to the bake setting and confirm that the new element begins to glow red and produce heat.
Related Articles & Videos
Bake Element Customer Reviews
Common Problems Fixed by the Bake Element
Based on customer reports and repair data, this part commonly fixes these issues:
Oven doesn't bake evenly
Oven temperature not accurate
Oven won't turn on
Oven burning food
Oven not heating
Oven won't turn off
Range is producing a burning smell
Wall oven is producing a burning smell
Range making a loud noise
About the Bake Element
If the bake element is burned out, the oven will only be heated by the broil element. This will cause the oven to heat unevenly. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it..